Southeast Non-Ferrous Alloys®
 | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Quotes 0 Items
SENFA® > Continuous Cast Wearplate > C93200 (SAE 660) Bronze Wearplates > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93200 (SAE 660) Bronze Wearplates

Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 932
SAE 660
83-7-7-3
ASTM B505

Bunting continuous cast bronze bars of C93200 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects..

Wearplate is stocked in 13" increments or 105" lengths, and is available in other lengths and non-standard sizes.

Typical Properties: (Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%

Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 30,000 min.
Yield Strength, PSI: 14,000 min.
Elongation: 15% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.

WARNING: This product can expose you to chemicals including nickel & lead, which is known to the state of California to cause cancer and lead, which is known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 1 - 25 of 46 1 2 

Item #

Stock
Item?

Nominal Thickness

Nominal Width

Thickness Min.

Thickness Max.

Width Min.

Width Max.

B932W002016 Yes 1/4 in 2 in 0.295 in 0.325 in 2.045 in 2.075 in
B932W002024 Yes 1/4 in 3 in 0.295 in 0.325 in 3.045 in 3.075 in
B932W002032 Yes 1/4 in 4 in 0.325 in 0.355 in 4.075 in 4.105 in
B932W002064 Yes 1/4 in 8 in 0.355 in 0.385 in 8.105 in 8.135 in
B932W002096 Yes 1/4 in 12 in 0.355 in 0.385 in 12.105 in 12.135 in
B932W003016 Yes 3/8 in 2 in 0.420 in 0.450 in 2.045 in 2.075 in
B932W003032 Yes 3/8 in 4 in 0.450 in 0.480 in 4.075 in 4.105 in
B932W003064 Yes 3/8 in 8 in 0.480 in 0.510 in 8.105 in 8.135 in
B932W003096 Yes 3/8 in 12 in 0.480 in 0.510 in 12.105 in 12.135 in
B932W004008 Yes 1/2 in 1 in 0.545 in 0.575 in 1.045 in 1.075 in
B932W004016 Yes 1/2 in 2 in 0.545 in 0.575 in 2.045 in 2.075 in
B932W004032 Yes 1/2 in 4 in 0.575 in 0.605 in 4.075 in 4.105 in
B932W004048 Yes 1/2 in 6 in 0.605 in 0.635 in 6.105 in 6.135 in
B932W004064 Yes 1/2 in 8 in 0.605 in 0.635 in 8.105 in 8.135 in
B932W004096 Yes 1/2 in 12 in 0.605 in 0.635 in 12.105 in 12.135 in
B932W006008 Yes 3/4 in 1 in 0.795 in 0.825 in 1.045 in 1.075 in
B932W006016 Yes 3/4 in 2 in 0.795 in 0.825 in 2.045 in 2.075 in
B932W006032 Yes 3/4 in 4 in 0.825 in 0.855 in 4.075 in 4.105 in
B932W006048 Yes 3/4 in 6 in 0.855 in 0.885 in 6.105 in 6.135 in
B932W006064 Yes 3/4 in 8 in 0.855 in 0.885 in 8.105 in 8.135 in
B932W006096 Yes 3/4 in 12 in 0.855 in 0.885 in 12.105 in 12.135 in
B932W008008 Yes 1 in 1 in 1.045 in 1.075 in 1.045 in 1.075 in
B932W008016 Yes 1 in 2 in 1.045 in 1.075 in 2.045 in 2.075 in
B932W008032 Yes 1 in 4 in 1.075 in 1.105 in 4.075 in 4.105 in
B932W008048 Yes 1 in 6 in 1.105 in 1.135 in 6.105 in 6.135 in
  Results 1 - 25 of 46 1 2 
Privacy Policy|Sitemap|Catalog IndexCopyright © 2019 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform