Providing Quality Engineered Solutions Since 1907
Bunting Bearings 1907-2007 100 Years
ISO 9001 Certified
View RFQs
 Request for Quote 0 Items
All Categories > Engineered Plastic Bearings > BU Dry Lubricant Bearings METRIC Sizes > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

BU Dry Lubricant Bearings METRIC Sizes

Check up to five results to perform an action.

Bunting “BU” Dry Lubricant
Bearings

Bunting’s “BU” product is a composite material, consisting of bonded layers of a steel backing and a porous bronze matrix, impregnated and overlaid with PTFE bearing material. The steel backing provides mechanical strength and the bronze inter-layer, impregnated with PTFE, provides a strong mechanical bond for the lining. During normal operation, a thin film from the PTFE lining is transferred to the opposing surface and maintained there throughout the working life of the bearing.

Bunting’s “BU” is available, from stock, in the form of wrapped bearings in both inch and metric sizes. Thrust washers, strip material and non-standard bearing sizes are also available.

Temperature range: -328°F/+536°F

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.


Search Items