Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C93800 (SAE 67) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93800 (SAE 67) Bronze Bars

 
Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 938
SAE 67 78-7-15
ASTM B271

Solid and cored bars are stocked in 13" increments and 105" lengths and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and alloys.

Typical Properties: (Not to be used for specification purposes.)
Copper 75.00 – 79.00%
Tin 6.30 – 7.50%
Lead 13.00 – 16.00%
Physical Properties: Centrifugal Cast
Tensile Strength PSI: 26,000 min.
Yield Strength PSI: 14,000 min.
Elongation: 12% min.
Brinell Hardness (500 kg load): 55 typical
Machinability Rating: 80
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93800 is similar to C93200 but the higher lead content improves the machinability and frictional properties. C93800 can be used in applications were lubrication may be interrupted without seizing. Bunting also produces other high-leaded alloys including C93400, C93600, C93700, C93900, C94000, C94100, C94300, C94400 and C94500.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 26 - 50 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

Sort by

I.D. Min

I.D. Max

O.D. Min

O.D. Max
B938F052084 Yes 6 1/2 in 10 1/2 in 6.3600 in 6.3900 in 10.6100 in 10.6400 in
B938F056084 Yes 7 in 10 1/2 in 6.8600 in 6.8900 in 10.6100 in 10.6400 in
B938F060084 Yes 7 1/2 in 10 1/2 in 7.3600 in 7.3900 in 10.6100 in 10.6400 in
B938F064084 Yes 8 in 10 1/2 in 7.8600 in 7.8900 in 10.6100 in 10.6400 in
B938F068084 Yes 8 1/2 in 10 1/2 in 8.3600 in 8.3900 in 10.6100 in 10.6400 in
B938F072084 Yes 9 in 10 1/2 in 8.8600 in 8.8900 in 10.6100 in 10.6400 in
B938F076084 Yes 9 1/2 in 10 1/2 in 9.3600 in 9.3900 in 10.6100 in 10.6400 in
B938F040088 Yes 5 in 11 in 4.8600 in 4.8900 in 11.1100 in 11.1400 in
B938F044088 Yes 5 1/2 in 11 in 5.3600 in 5.3900 in 11.1100 in 11.1400 in
B938F048088 Yes 6 in 11 in 5.8600 in 5.8900 in 11.1100 in 11.1400 in
B938F052088 Yes 6 1/2 in 11 in 6.3600 in 6.3900 in 11.1100 in 11.1400 in
B938F056088 Yes 7 in 11 in 6.8600 in 6.8900 in 11.1100 in 11.1400 in
B938F060088 Yes 7 1/2 in 11 in 7.3600 in 7.3900 in 11.1100 in 11.1400 in
B938F064088 Yes 8 in 11 in 7.8600 in 7.8900 in 11.1100 in 11.1400 in
B938F068088 Yes 8 1/2 in 11 in 8.3600 in 8.3900 in 11.1100 in 11.1400 in
B938F072088 Yes 9 in 11 in 8.8600 in 8.8900 in 11.1100 in 11.1400 in
B938F076088 Yes 9 1/2 in 11 in 9.3600 in 9.3900 in 11.1100 in 11.1400 in
B938F080088 Yes 10 in 11 in 9.8600 in 9.8900 in 11.1100 in 11.1400 in
B938F040092 Yes 5 in 11 1/2 in 4.8600 in 4.8900 in 11.6100 in 11.6400 in
B938F044092 Yes 5 1/2 in 11 1/2 in 5.3600 in 5.3900 in 11.6100 in 11.6400 in
B938F048092 Yes 6 in 11 1/2 in 5.8600 in 5.8900 in 11.6100 in 11.6400 in
B938F052092 Yes 6 1/2 in 11 1/2 in 6.3600 in 6.3900 in 11.6100 in 11.6400 in
B938F056092 Yes 7 in 11 1/2 in 6.8600 in 6.8900 in 11.6100 in 11.6400 in
B938F060092 Yes 7 1/2 in 11 1/2 in 7.3600 in 7.3900 in 11.6100 in 11.6400 in
B938F064092 Yes 8 in 11 1/2 in 7.8600 in 7.8900 in 11.6100 in 11.6400 in
  Results 26 - 50 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform