Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C86300 (SAE 430B) Manganese Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C86300 (SAE 430B) Manganese Bronze Bars

 
Check up to five results to perform an action.

C86300 Manganese Bronze is a non-lead “GREEN” Alloy
Manganese Bronze CDA 863
SAE 430B
ASTM B271

Solid and cored bars are stocked in 13" increments and 144" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 60.00 – 66.00%
Zinc: 22.00 – 28.00%
Iron: 2.00 – 4.00%
Aluminum: 5.00 – 7.50%
Manganese: 2.50 – 5.00%

Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 110,000 min.
Yield Strength, PSI: 62,000 min.
Elongation: 14% min.
Brinell Hardness (3000 kg load): 225 typical
Machinability Rating: 80
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 400°F

C86300 Aluminum bronze is used for low speed, and very high load bearing applications. C86300 requires hardened steel shafts and constant lubrication of grease, graphite or molybdenum-disulfide. Bunting also produces other Manganese Bronzes including C86200, C86400, C86500 and C86700.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 26 - 50 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Sort by

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max
B863F124144 Yes 15 1/2 in 18 in 15.3600 in 15.3900 in 18.1100 in 18.1400 in
B863F124140 Yes 15 1/2 in 17 1/2 in 15.3600 in 15.3900 in 17.6100 in 17.6400 in
B863F124136 Yes 15 1/2 in 17 in 15.3600 in 15.3900 in 17.1100 in 17.1400 in
B863F124132 Yes 15 1/2 in 16 1/2 in 15.3600 in 15.3900 in 16.6100 in 16.6400 in
B863F120148 Yes 15 in 18 1/2 in 14.8600 in 14.8900 in 18.6100 in 18.6400 in
B863F120144 Yes 15 in 18 in 14.8600 in 14.8900 in 18.1100 in 18.1400 in
B863F120140 Yes 15 in 17 1/2 in 14.8600 in 14.8900 in 17.6100 in 17.6400 in
B863F120136 Yes 15 in 17 in 14.8600 in 14.8900 in 17.1100 in 17.1400 in
B863F120132 Yes 15 in 16 1/2 in 14.8600 in 14.8900 in 16.6100 in 16.6400 in
B863F120128 Yes 15 in 16 in 14.8600 in 14.8900 in 16.1100 in 16.1400 in
B863F116136 Yes 14 1/2 in 17 in 14.3600 in 14.3900 in 17.1100 in 17.1400 in
B863F116132 Yes 14 1/2 in 16 1/2 in 14.3600 in 14.3900 in 16.6100 in 16.6400 in
B863F116128 Yes 14 1/2 in 16 in 14.3600 in 14.3900 in 16.1100 in 16.1400 in
B863F116124 Yes 14 1/2 in 15 1/2 in 14.3600 in 14.3900 in 15.6100 in 15.6400 in
B863F112144 Yes 14 in 18 in 13.8600 in 13.8900 in 18.1100 in 18.1400 in
B863F112136 Yes 14 in 17 in 13.8600 in 13.8900 in 17.1100 in 17.1400 in
B863F112132 Yes 14 in 16 1/2 in 13.8600 in 13.8900 in 16.6100 in 16.6400 in
B863F112128 Yes 14 in 16 in 13.8600 in 13.8900 in 16.1100 in 16.1400 in
B863F112124 Yes 14 in 15 1/2 in 13.8600 in 13.8900 in 15.6100 in 15.6400 in
B863F112120 Yes 14 in 15 in 13.8600 in 13.8900 in 15.1100 in 15.1400 in
B863F108136 Yes 13 1/2 in 17 in 13.3600 in 13.3900 in 17.1100 in 17.1400 in
B863F108132 Yes 13 1/2 in 16 1/2 in 13.3600 in 13.3900 in 16.6100 in 16.6400 in
B863F108128 Yes 13 1/2 in 16 in 13.3600 in 13.3900 in 16.1100 in 16.1400 in
B863F108124 Yes 13 1/2 in 15 1/2 in 13.3600 in 13.3900 in 15.6100 in 15.6400 in
B863F108120 Yes 13 1/2 in 15 in 13.3600 in 13.3900 in 15.1100 in 15.1400 in
  Results 26 - 50 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform