Print Back
Bunting Nylon Bearings

NYLON -Molded Nylon 101 sleeve (plain), flange, and thrust bearings provide an economical alternative where performance characteristics and the strength of metal bearings are not required. Bunting Bearings carries a full line of sleeve (plain), flange, and thrust styles to accommodate shafts up to 1" diameter.

Bunting Nylon Bearings inner diameters are measured after installation in a nominal housing.

Temperature range: -20°F/+250°F

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Nylon Flanged edited 1
Unit of Measure
1 2 3 4 

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max

Length (±0.015in)

NF081224 N/A Yes N/A 1/2 in N/A 3/4 in N/A 0.5000 in N/A 0.5050 in N/A 0.7500 in N/A 0.7550 in N/A 1 1/2 in
NF091111 N/A Yes N/A 9/16 in N/A 11/16 in N/A 0.5625 in N/A 0.5675 in N/A 0.5625 in N/A 0.6925 in N/A 11/16 in
NF091212 N/A Yes N/A 9/16 in N/A 3/4 in N/A 0.5625 in N/A 0.5675 in N/A 0.5625 in N/A 0.7550 in N/A 3/4 in
NF101206 N/A Yes N/A 5/8 in N/A 3/4 in N/A 0.6250 in N/A 0.6300 in N/A 0.7500 in N/A 0.7550 in N/A 3/8 in
NF101207 N/A Yes N/A 5/8 in N/A 3/4 in N/A 0.6250 in N/A 0.6300 in N/A 0.7500 in N/A 0.7550 in N/A 7/16 in
NF101210 N/A No N/A 5/8 in N/A 3/4 in N/A 0.6250 in N/A 0.6300 in N/A 0.7500 in N/A 0.7550 in N/A 5/8 in
NF101212 N/A Yes N/A 5/8 in N/A 3/4 in N/A 0.6250 in N/A 0.6300 in N/A 0.7500 in N/A 0.7550 in N/A 3/4 in
NF101216 N/A Yes N/A 5/8 in N/A 3/4 in N/A 0.6250 in N/A 0.6300 in N/A 0.7500 in N/A 0.7550 in N/A 1 in
NF101220 N/A Yes N/A 5/8 in N/A 3/4 in N/A 0.6250 in N/A 0.6300 in N/A 0.7500 in N/A 0.7550 in N/A 1 1/4 in
NF101313 N/A No N/A 5/8 in N/A 13/16 in N/A 0.6250 in N/A 0.6300 in N/A 0.8125 in N/A 0.8175 in N/A 13/16 in
NF101408 N/A Yes N/A 5/8 in N/A 7/8 in N/A 0.6250 in N/A 0.6300 in N/A 0.8750 in N/A 0.8800 in N/A 1/2 in
NF101411 N/A No N/A 5/8 in N/A 7/8 in N/A 0.6250 in N/A 0.6300 in N/A 0.8750 in N/A 0.8800 in N/A 11/16 in
NF101412 N/A Yes N/A 5/8 in N/A 7/8 in N/A 0.6250 in N/A 0.6300 in N/A 0.8750 in N/A 0.8800 in N/A 3/4 in
NF101414 N/A No N/A 5/8 in N/A 7/8 in N/A 0.6250 in N/A 0.6300 in N/A 0.8750 in N/A 0.8800 in N/A 7/8 in
NF121410 N/A Yes N/A 3/4 in N/A 7/8 in N/A 0.7500 in N/A 0.7550 in N/A 0.8750 in N/A 0.8800 in N/A 5/8 in
NF121412 N/A Yes N/A 3/4 in N/A 7/8 in N/A 0.7500 in N/A 0.7550 in N/A 0.8750 in N/A 0.8800 in N/A 3/4 in
NF121413 N/A No N/A 3/4 in N/A 7/8 in N/A 0.7500 in N/A 0.7550 in N/A 0.8750 in N/A 0.8800 in N/A 13/16 in
NF121414 N/A Yes N/A 3/4 in N/A 7/8 in N/A 0.7500 in N/A 0.7550 in N/A 0.8750 in N/A 0.8800 in N/A 7/8 in
NF121416 N/A Yes N/A 3/4 in N/A 7/8 in N/A 0.7500 in N/A 0.7550 in N/A 0.8750 in N/A 0.8800 in N/A 1 in
NF121418 N/A No N/A 3/4 in N/A 7/8 in N/A 0.7500 in N/A 0.7550 in N/A 0.8750 in N/A 0.8800 in N/A 1 1/8 in
NF121420 N/A Yes N/A 3/4 in N/A 7/8 in N/A 0.7500 in N/A 0.7550 in N/A 0.8750 in N/A 0.8800 in N/A 1 1/4 in
NF121515 N/A Yes N/A 3/4 in N/A 15/16 in N/A 0.7500 in N/A 0.7550 in N/A 0.9375 in N/A 0.9425 in N/A 15/16 in
NF121614 N/A Yes N/A 3/4 in N/A 1 in N/A 0.7500 in N/A 0.7550 in N/A 1.0000 in N/A 1.0050 in N/A 7/8 in
NF121616 N/A Yes N/A 3/4 in N/A 1 in N/A 0.7500 in N/A 0.7550 in N/A 1.0000 in N/A 1.0050 in N/A 1 in
NF121618 N/A No N/A 3/4 in N/A 1 in N/A 0.7500 in N/A 0.7550 in N/A 1.0000 in N/A 1.0050 in N/A 1 1/8 in
Unit of Measure
1 2 3 4