Southeast Non-Ferrous Alloys®
SENFA® > Continuous Cast Solid Bars > C95900 Aluminum Bronze Bars > Item # B959S000012  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # B959S000012, C95900 Continuous Cast Aluminum Bronze Solid Bars



C95900 Aluminum Bronze is a non-lead “GREEN” Alloy
Aluminum Bronze
CDA 959
ASTM B505


Solid bars are stocked in 13" increments and 144" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: Remainder
Aluminum: 12.00 – 13.50%
Iron: 3.00 – 5.00%
Brinell Hardness (3000 kg load): 241 minimum
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 750°F intermittent to 1200°F

C95900 Aluminum bronze is an extremely hard, wear resistant material used for low speed, and very high load bearing applications. C95900 requires hardened steel shafts and constant lubrication of grease, graphite or molybdenum-disulfide.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.





 Specifications   

Stock Item?1

No

Nominal Size I.D.

SOLID

Nominal Size O.D.

1 1/2 in

O.D. Min

1.5550 in

O.D. Max

1.5750 in

Min. Temperature

-450 ºF

Max. Temperature

750 intermittent to 1200 ºF

P Value (Max.)

8000

V Value (Max.)

100

PV Value (Max.)

150000
1 Minimum quantities may apply to non-stock items, please contact customer service for more information.


Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform