Southeast Non-Ferrous Alloys®
SENFA® > Continuous Cast Wearplate > C95400 Aluminum Bronze Wearplates > Item # B954W002096  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # B954W002096, C95400 Continuous Cast Aluminum Bronze Wearplate



C95400 Aluminum Bronze is a non-lead “GREEN” Alloy
Aluminum Bronze
CDA 954
9C
ASTM B505


Aluminum bronze is a very hard, strong, abrasion resistant bronze whose physical properties remain good at elevated temperatures – compressive strength at 500°F is the same as that of tin bronzes at room temperature. Good applications include heavy earth moving equipment, roll neck bearings, and machine tool bearings.

C95400 is available in either as cast condition or heat-treated.

Typical Properties: (Not to be used for specification purposes.)
Copper: 83.00% min.
Aluminum: 10.00 – 11.50%
Iron 3.00: – 5.00%

Physical Properties: Continuous Cast
As Cast
Tensile Strength, PSI: 85,000 min.
Yield Strength, PSI: 32,000 min.
Elongation: 12% min.

Heat Treated
Tensile Strength, PSI: 95,000 min.
Yield Strength, PSI: 45,000 min.
Elongation: 10% min.
Brinell Hardness (3000 kg load; As Cast): 170
Brinell Hardness (3000 kg load; Heat Treated): 195
Machinability Rating: 60
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 750°F intermittent to 1200°F

C95400 Aluminum bronze is used for low speed, and very high load bearing applications. C95400 requires hardened steel shafts and constant lubrication of grease, graphite or molybdenum-disulfide.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.





 Specifications   

Stock Item?1

Yes

Nominal Thickness

1/4 in

Nominal Width

12 in

Thickness Min.

0.355 in

Thickness Max.

0.395 in

Width Min.

12.105 in

Width Max.

12.145 in

Min. Temperature

-450 ºF

Max. Temperature

750 intermittent to 1200 ºF

P Value (Max.)

6000

V Value (Max.)

250

PV Value (Max.)

125000
1 Minimum quantities may apply to non-stock items, please contact customer service for more information.


Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform