High-Leaded Tin Bronze
CDA 937
SAE 64 83-10-10
ASTM B505
Bunting continuous cast bronze bars of C93700 give superior quality and performance. Continuous
casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and
component rejects.
Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other
lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for
prototypes, or for emergency repairs.
Typical Properties: (Not to be used for specification purposes.)
Copper: 78.00 – 82.00%
Tin: 9.00 – 11.00%
Lead: 8.00 – 11.00%
Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 6% min.
Brinell Hardness (500 kg load): 60 typical
Machinability Rating 80
Minimum Operating Temperature -450°F
Maximum Operating Temperature 500°F
C93700 has higher tin and lead than C93200 and is used in bearings with higher speeds and loads. It
has increased corrosion and oxidation resistance, with good anti-frictional properties, good load-carrying
ability and excellent machinability. C93700 can be used in applications where lubrication may be low or
interrupted.
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to
www.p65warnings.ca.gov.
