Southeast Non-Ferrous Alloys®
SENFA® > Continuous Cast Cored Bars > C93200 (SAE 660) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93200 (SAE 660) Bronze Bars

 
Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 932
SAE 660
83-7-7-3
ASTM B505

Bunting continuous cast bronze bars of C93200 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%

Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 10% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 101 - 125 of 289  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max
B932C015018 Yes 1 7/8 in 2 1/4 in 1.8110 in 1.8550 in 2.2840 in 2.2940 in
B932C015019 Yes 1 7/8 in 2 3/8 in 1.8110 in 1.8550 in 2.4090 in 2.4190 in
B932C015020 No 1 7/8 in 2 1/2 in 1.8110 in 1.8550 in 2.5340 in 2.5440 in
B932C015021 No 1 7/8 in 2 5/8 in 1.8110 in 1.8550 in 2.6590 in 2.6690 in
B932C015024 No 1 7/8 in 3 in 1.8110 in 1.8550 in 3.0340 in 3.0440 in
B932C016018 Yes 2 in 2 1/4 in 1.9360 in 1.9800 in 2.2840 in 2.2940 in
B932C016019 Yes 2 in 2 3/8 in 1.9360 in 1.9800 in 2.4090 in 2.4190 in
B932C016020 Yes 2 in 2 1/2 in 1.9360 in 1.9800 in 2.5340 in 2.5440 in
B932C016021 Yes 2 in 2 5/8 in 1.9360 in 1.9800 in 2.6590 in 2.6690 in
B932C016022 Yes 2 in 2 3/4 in 1.9360 in 1.9800 in 2.7840 in 2.7940 in
B932C016023 Yes 2 in 2 7/8 in 1.9360 in 1.9800 in 2.9090 in 2.9190 in
B932C016024 Yes 2 in 3 in 1.9360 in 1.9800 in 3.0340 in 3.0440 in
B932C016026 Yes 2 in 3 1/4 in 1.9360 in 1.9800 in 3.2840 in 3.2940 in
B932C016028 Yes 2 in 3 1/2 in 1.9360 in 1.9800 in 3.5340 in 3.5440 in
B932C016030 Yes 2 in 3 3/4 in 1.9360 in 1.9800 in 3.7840 in 3.7940 in
B932C016032 Yes 2 in 4 in 1.8910 in 1.9530 in 4.0550 in 4.0710 in
B932C016036 Yes 2 in 4 1/2 in 1.8910 in 1.9530 in 4.5550 in 4.5710 in
B932C016040 Yes 2 in 5 in 1.8910 in 1.9530 in 5.0550 in 5.0710 in
B932C016044 Yes 2 in 5 1/2 in 1.8420 in 1.9380 in 5.5780 in 5.6100 in
B932C016048 Yes 2 in 6 in 1.8420 in 1.9380 in 6.0780 in 6.1100 in
B932C017021 No 2 1/8 in 2 5/8 in 2.0610 in 2.1050 in 2.6590 in 2.6690 in
B932C017022 No 2 1/8 in 2 3/4 in 2.0610 in 2.1050 in 2.7840 in 2.7940 in
B932C017023 No 2 1/8 in 2 7/8 in 2.0610 in 2.1050 in 2.9090 in 2.9190 in
B932C018022 Yes 2 1/4 in 2 3/4 in 2.1860 in 2.2300 in 2.7840 in 2.7940 in
B932C018023 No 2 1/4 in 2 7/8 in 2.1860 in 2.2300 in 2.9090 in 2.9190 in
  Results 101 - 125 of 289  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform