Southeast Non-Ferrous Alloys®
SENFA® > Continuous Cast Cored Bars > C93200 (SAE 660) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93200 (SAE 660) Bronze Bars

 
Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 932
SAE 660
83-7-7-3
ASTM B505

Bunting continuous cast bronze bars of C93200 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%

Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 10% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 1 - 25 of 289  1 2 3 4 5 »  

Item #

Stock
Item?

Sort by

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max
B932C004009 No 1/2 in 1 1/8 in 0.4360 in 0.4800 in 1.1560 in 1.1660 in
B932C004014 No 1/2 in 1 3/4 in 0.4360 in 0.4800 in 1.7810 in 1.7910 in
B932C005010 No 5/8 in 1 1/4 in 0.5610 in 0.6050 in 1.2810 in 1.2910 in
B932C005011 No 5/8 in 1 3/8 in 0.5610 in 0.6050 in 1.4060 in 1.4160 in
B932C005016 No 5/8 in 2 in 0.5610 in 0.6050 in 2.0340 in 2.0440 in
B932C006020 No 3/4 in 2 1/2 in 0.6860 in 0.7300 in 2.5340 in 2.5440 in
B932C006022 No 3/4 in 2 3/4 in 0.6860 in 0.7300 in 2.7840 in 2.7940 in
B932C007013 No 7/8 in 1 5/8 in 0.8110 in 0.8550 in 1.6560 in 1.6660 in
B932C007014 No 7/8 in 1 3/4 in 0.8110 in 0.8550 in 1.7810 in 1.7910 in
B932C007016 No 7/8 in 2 in 0.8110 in 0.8550 in 2.0340 in 2.0440 in
B932C008019 No 1 in 2 3/8 in 0.9360 in 0.9800 in 2.4090 in 2.4190 in
B932C008026 No 1 in 3 1/4 in 0.9360 in 0.9800 in 3.2840 in 3.2940 in
B932C009013 No 1 1/8 in 1 5/8 in 1.0610 in 1.1050 in 1.6560 in 1.6660 in
B932C009015 No 1 1/8 in 1 7/8 in 1.0610 in 1.1050 in 1.9060 in 1.9160 in
B932C010032 No 1 1/4 in 4 in 1.1410 in 1.2030 in 4.0550 in 4.0710 in
B932C011015 No 1 3/8 in 1 7/8 in 1.3110 in 1.3550 in 1.9060 in 1.9160 in
B932C011018 No 1 3/8 in 2 1/4 in 1.3110 in 1.3550 in 2.2840 in 2.2940 in
B932C011024 No 1 3/8 in 3 in 1.3110 in 1.3550 in 3.0340 in 3.0440 in
B932C012017 No 1 1/2 in 2 1/8 in 1.4360 in 1.4800 in 2.1590 in 2.1690 in
B932C013018 No 1 5/8 in 2 1/4 in 1.5610 in 1.6050 in 2.2840 in 2.2940 in
B932C013020 No 1 5/8 in 2 1/2 in 1.5610 in 1.6050 in 2.5340 in 2.5440 in
B932C013022 No 1 5/8 in 2 3/4 in 1.5610 in 1.6050 in 2.7840 in 2.7940 in
B932C013024 No 1 5/8 in 3 in 1.5610 in 1.6050 in 3.0340 in 3.0440 in
B932C014021 No 1 3/4 in 2 5/8 in 1.6860 in 1.7300 in 2.6590 in 2.6690 in
B932C014032 No 1 3/4 in 4 in 1.6410 in 1.7030 in 4.0550 in 4.0710 in
  Results 1 - 25 of 289  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform