Southeast Non-Ferrous Alloys®
SENFA® > Continuous Cast Cored Bars > C93700 (SAE 64) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93700 (SAE 64) Bronze Bars

Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 937
SAE 64 83-10-10
ASTM B505


Bunting continuous cast bronze bars of C93700 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: 78.00 – 82.00%
Tin: 9.00 – 11.00%
Lead: 8.00 – 11.00%

Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 6% min.
Brinell Hardness (500 kg load): 60 typical
Machinability Rating 80
Minimum Operating Temperature -450°F
Maximum Operating Temperature 500°F

C93700 has higher tin and lead than C93200 and is used in bearings with higher speeds and loads. It has increased corrosion and oxidation resistance, with good anti-frictional properties, good load-carrying ability and excellent machinability. C93700 can be used in applications where lubrication may be low or interrupted.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 1 - 19 of 19 1 

Item #

Stock
Item?

Nom
Size I.D.

Sort by

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max

B937C004008 No 1/2 in 1 in 0.4360 in 0.4800 in 1.0310 in 1.0410 in
B937C006010 No 3/4 in 1 1/4 in 0.6860 in 0.7300 in 1.2810 in 1.2910 in
B937C008012 Yes 1 in 1 1/2 in 0.9360 in 0.9800 in 1.5310 in 1.5410 in
B937C008016 No 1 in 2 in 0.9360 in 0.9800 in 2.0340 in 2.0440 in
B937C012016 No 1 1/2 in 2 in 1.4360 in 1.4800 in 2.0340 in 2.0440 in
B937C012020 No 1 1/2 in 2 1/2 in 1.4360 in 1.4800 in 2.5340 in 2.5440 in
B937C016020 No 2 in 2 1/2 in 1.9360 in 1.9800 in 2.5340 in 2.5440 in
B937C016024 No 2 in 3 in 1.9360 in 1.9800 in 3.0340 in 3.0440 in
B937C020024 No 2 1/2 in 3 in 2.4360 in 2.4800 in 3.0340 in 3.0440 in
B937C020028 No 2 1/2 in 3 1/2 in 2.4360 in 2.4800 in 3.5340 in 3.5440 in
B937C024028 No 3 in 3 1/2 in 2.9360 in 2.9800 in 3.5340 in 3.5440 in
B937C024032 No 3 in 4 in 2.8910 in 2.9530 in 4.0550 in 4.0710 in
B937C028032 No 3 1/2 in 4 in 3.3910 in 3.4530 in 4.0550 in 4.0710 in
B937C028036 No 3 1/2 in 4 1/2 in 3.3910 in 3.4530 in 4.5550 in 4.5710 in
B937C032036 No 4 in 4 1/2 in 3.8910 in 3.9530 in 4.5550 in 4.5710 in
B937C032040 No 4 in 5 in 3.8910 in 3.9530 in 5.0550 in 5.0710 in
B937C034042 No 4 1/4 in 5 1/4 in 4.0920 in 4.1880 in 5.3280 in 5.3600 in
B937C036044 No 4 1/2 in 5 1/2 in 4.3420 in 4.4380 in 5.5780 in 5.6100 in
B937C040048 No 5 in 6 in 4.8420 in 4.9380 in 6.0780 in 6.1100 in
  Results 1 - 19 of 19 1 
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform