Southeast Non-Ferrous Alloys®
SENFA® > Continuous Cast Cored Bars > C95400 Aluminum Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C95400 Aluminum Bronze Bars

 
Check up to five results to perform an action.

C95400 Aluminum Bronze is a non-lead “GREEN” Alloy
Aluminum Bronze
CDA 954
9C
ASTM B505

Aluminum bronze is a very hard, strong, abrasion resistant bronze whose physical properties remain good at elevated temperatures – compressive strength at 500°F is the same as that of tin bronzes at room temperature. Good applications include heavy earth moving equipment, roll neck bearings, and machine tool bearings.

Solid and cored bars are stocked in 13" increments and 144" lengths, and are available in other lengths and non-standard sizes. Solid and cored bars over 8" O.D. are stocked in 105" lengths. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

C95400 is available in either as cast condition or heat-treated.

Typical Properties: (Not to be used for specification purposes.)
Copper: 83.00% min.
Aluminum: 10.00 – 11.50%
Iron 3.00: – 5.00%

Physical Properties: Continuous Cast
As Cast
Tensile Strength, PSI: 85,000 min.
Yield Strength, PSI: 32,000 min.
Elongation: 12% min.

Heat Treated
Tensile Strength, PSI: 95,000 min.
Yield Strength, PSI: 45,000 min.
Elongation: 10% min.
Brinell Hardness (3000 kg load; As Cast): 170
Brinell Hardness (3000 kg load; Heat Treated): 195
Machinability Rating: 60
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 750°F intermittent to 1200°F

C95400 Aluminum bronze is used for low speed, and very high load bearing applications. C95400 requires hardened steel shafts and constant lubrication of grease, graphite or molybdenum-disulfide.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 51 - 75 of 117 1 2 3 4 5 

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max

Sort by
B954C024030 Yes 3 in 3 3/4 in 2.8750 in 2.9250 in 3.8250 in 3.8550 in
B954C012032 Yes 1 1/2 in 4 in 1.3750 in 1.4250 in 4.0750 in 4.1050 in
B954C016032 Yes 2 in 4 in 1.8750 in 1.9250 in 4.0750 in 4.1050 in
B954C020032 Yes 2 1/2 in 4 in 2.3750 in 2.4250 in 4.0750 in 4.1050 in
B954C022032 No 2 3/4 in 4 in 2.6250 in 2.6750 in 4.0750 in 4.1050 in
B954C024032 Yes 3 in 4 in 2.8750 in 2.9250 in 4.0750 in 4.1050 in
B954C026032 No 3 1/4 in 4 in 3.1250 in 3.1750 in 4.0750 in 4.1050 in
B954C028032 Yes 3 1/2 in 4 in 3.3750 in 3.4250 in 4.0750 in 4.1050 in
B954C022034 No 2 3/4 in 4 1/4 in 2.6250 in 2.6750 in 4.3250 in 4.3550 in
B954C024034 Yes 3 in 4 1/4 in 2.8750 in 2.9250 in 4.3250 in 4.3550 in
B954C026034 No 3 1/4 in 4 1/4 in 3.1250 in 3.1750 in 4.3250 in 4.3550 in
B954C028034 Yes 3 1/2 in 4 1/4 in 3.3750 in 3.4250 in 4.3250 in 4.3550 in
B954C012036 No 1 1/2 in 4 1/2 in 1.3750 in 1.4250 in 4.5750 in 4.6050 in
B954C016036 Yes 2 in 4 1/2 in 1.8750 in 1.9250 in 4.5750 in 4.6050 in
B954C020036 Yes 2 1/2 in 4 1/2 in 2.3750 in 2.4250 in 4.5750 in 4.6050 in
B954C022036 No 2 3/4 in 4 1/2 in 2.6250 in 2.6750 in 4.5750 in 4.6050 in
B954C024036 Yes 3 in 4 1/2 in 2.8750 in 2.9250 in 4.5750 in 4.6050 in
B954C026036 No 3 1/4 in 4 1/2 in 3.1250 in 3.1750 in 4.5750 in 4.6050 in
B954C028036 Yes 3 1/2 in 4 1/2 in 3.3750 in 3.4250 in 4.5750 in 4.6050 in
B954C032036 No 4 in 4 1/2 in 3.8750 in 3.9250 in 4.5750 in 4.6050 in
B954C030038 No 3 3/4 in 4 3/4 in 3.5950 in 3.6550 in 4.8550 in 4.8950 in
B954C032038 Yes 4 in 4 3/4 in 3.8450 in 3.9050 in 4.8550 in 4.8950 in
B954C016040 Yes 2 in 5 in 1.8450 in 1.9050 in 5.1050 in 5.1450 in
B954C020040 Yes 2 1/2 in 5 in 2.3450 in 2.4050 in 5.1050 in 5.1450 in
B954C024040 Yes 3 in 5 in 2.8450 in 2.9050 in 5.1050 in 5.1450 in
  Results 51 - 75 of 117 1 2 3 4 5 
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform