Southeast Non-Ferrous Alloys®
SENFA® > Continuous Cast Wearplate > C95400 Aluminum Bronze Wearplates > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C95400 Aluminum Bronze Wearplates

 
Check up to five results to perform an action.

C95400 Aluminum Bronze is a non-lead “GREEN” Alloy
Aluminum Bronze
CDA 954
9C
ASTM B505

Aluminum bronze is a very hard, strong, abrasion resistant bronze whose physical properties remain good at elevated temperatures – compressive strength at 500°F is the same as that of tin bronzes at room temperature. Good applications include heavy earth moving equipment, roll neck bearings, and machine tool bearings.

C95400 is available in either as cast condition or heat-treated.

Typical Properties: (Not to be used for specification purposes.)
Copper: 83.00% min.
Aluminum: 10.00 – 11.50%
Iron 3.00: – 5.00%

Physical Properties: Continuous Cast
As Cast
Tensile Strength, PSI: 85,000 min.
Yield Strength, PSI: 32,000 min.
Elongation: 12% min.

Heat Treated
Tensile Strength, PSI: 95,000 min.
Yield Strength, PSI: 45,000 min.
Elongation: 10% min.
Brinell Hardness (3000 kg load; As Cast): 170
Brinell Hardness (3000 kg load; Heat Treated): 195
Machinability Rating: 60
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 750°F intermittent to 1200°F

C95400 Aluminum bronze is used for low speed, and very high load bearing applications. C95400 requires hardened steel shafts and constant lubrication of grease, graphite or molybdenum-disulfide.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 51 - 75 of 135  1 2 3 4 5 »  

Item #

Stock
Item?

Nominal Thickness

Nominal Width

Thickness Min.

Thickness Max.

Width Min.

Sort by

Width Max.
B954W014040 Yes 1 3/4 in 5 in 1.855 in 1.895 in 5.105 in 5.145 in
B954W012040 Yes 1 1/2 in 5 in 1.605 in 1.645 in 5.105 in 5.145 in
B954W010040 Yes 1 1/4 in 5 in 1.355 in 1.395 in 5.105 in 5.145 in
B954W008040 Yes 1 in 5 in 1.105 in 1.145 in 5.105 in 5.145 in
B954W006040 Yes 3/4 in 5 in 0.855 in 0.895 in 5.105 in 5.145 in
B954W005040 Yes 5/8 in 5 in 0.730 in 0.770 in 5.105 in 5.145 in
B954W004040 Yes 1/2 in 5 in 0.605 in 0.645 in 5.105 in 5.145 in
B954W003040 Yes 3/8 in 5 in 0.480 in 0.520 in 5.105 in 5.145 in
B954W002040 Yes 1/4 in 5 in 0.355 in 0.395 in 5.105 in 5.145 in
B954W024032 Yes 3 in 4 in 3.070 in 3.110 in 4.070 in 4.110 in
B954W020032 Yes 2 1/2 in 4 in 2.570 in 2.610 in 4.070 in 4.110 in
B954W016032 Yes 2 in 4 in 2.070 in 2.110 in 4.070 in 4.110 in
B954W014032 Yes 1 3/4 in 4 in 1.820 in 1.860 in 4.070 in 4.110 in
B954W012032 Yes 1 1/2 in 4 in 1.570 in 1.610 in 4.070 in 4.110 in
B954W010032 Yes 1 1/4 in 4 in 1.320 in 1.360 in 4.070 in 4.110 in
B954W008032 Yes 1 in 4 in 1.070 in 1.110 in 4.070 in 4.110 in
B954W006032 Yes 3/4 in 4 in 0.820 in 0.860 in 4.070 in 4.110 in
B954W005032 Yes 5/8 in 4 in 0.695 in 0.735 in 4.070 in 4.110 in
B954W004032 Yes 1/2 in 4 in 0.570 in 0.610 in 4.070 in 4.110 in
B954W003032 Yes 3/8 in 4 in 0.445 in 0.485 in 4.070 in 4.110 in
B954W002032 Yes 1/4 in 4 in 0.320 in 0.360 in 4.070 in 4.110 in
B954W016028 Yes 2 in 3 1/2 in 2.070 in 2.110 in 3.570 in 3.610 in
B954W012028 Yes 1 1/2 in 3 1/2 in 1.570 in 1.610 in 3.570 in 3.610 in
B954W010028 Yes 1 1/4 in 3 1/2 in 1.320 in 1.360 in 3.570 in 3.610 in
B954W008028 Yes 1 in 3 1/2 in 1.070 in 1.110 in 3.570 in 3.610 in
  Results 51 - 75 of 135  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform