Southeast Non-Ferrous Alloys®
SENFA® > Continuous Cast Wearplate > C95400 Aluminum Bronze Wearplates > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C95400 Aluminum Bronze Wearplates

Check up to five results to perform an action.

C95400 Aluminum Bronze is a non-lead “GREEN” Alloy
Aluminum Bronze
CDA 954
9C
ASTM B505


Aluminum bronze is a very hard, strong, abrasion resistant bronze whose physical properties remain good at elevated temperatures – compressive strength at 500°F is the same as that of tin bronzes at room temperature. Good applications include heavy earth moving equipment, roll neck bearings, and machine tool bearings.

C95400 is available in either as cast condition or heat-treated.

Typical Properties: (Not to be used for specification purposes.)
Copper: 83.00% min.
Aluminum: 10.00 – 11.50%
Iron 3.00: – 5.00%

Physical Properties: Continuous Cast
As Cast
Tensile Strength, PSI: 85,000 min.
Yield Strength, PSI: 32,000 min.
Elongation: 12% min.

Heat Treated
Tensile Strength, PSI: 95,000 min.
Yield Strength, PSI: 45,000 min.
Elongation: 10% min.
Brinell Hardness (3000 kg load; As Cast): 170
Brinell Hardness (3000 kg load; Heat Treated): 195
Machinability Rating: 60
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 750°F intermittent to 1200°F

C95400 Aluminum bronze is used for low speed, and very high load bearing applications. C95400 requires hardened steel shafts and constant lubrication of grease, graphite or molybdenum-disulfide.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 126 - 135 of 135 « 6 

Item #

Stock
Item?

Nominal Thickness

Nominal Width

Thickness Min.

Thickness Max.

Width Min.

Sort by

Width Max.

B954W004096 Yes 1/2 in 12 in 0.605 in 0.645 in 12.105 in 12.145 in
B954W005096 Yes 5/8 in 12 in 0.730 in 0.770 in 12.105 in 12.145 in
B954W006096 Yes 3/4 in 12 in 0.855 in 0.895 in 12.105 in 12.145 in
B954W008096 Yes 1 in 12 in 1.105 in 1.145 in 12.105 in 12.145 in
B954W010096 Yes 1 1/4 in 12 in 1.355 in 1.395 in 12.105 in 12.145 in
B954W012096 Yes 1 1/2 in 12 in 1.605 in 1.645 in 12.105 in 12.145 in
B954W014096 Yes 1 3/4 in 12 in 1.855 in 1.895 in 12.105 in 12.145 in
B954W016096 Yes 2 in 12 in 2.105 in 2.145 in 12.105 in 12.145 in
B954W020096 Yes 2 1/2 in 12 in 2.605 in 2.645 in 12.105 in 12.145 in
B954W024096 Yes 3 in 12 in 3.105 in 3.145 in 12.105 in 12.145 in
  Results 126 - 135 of 135 « 6 
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform