Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C89835 Cast Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C89835 Cast Bronze Bars

 
Check up to five results to perform an action.

C89835 is a “GREEN” Copper-Bismuth non-leaded alloy
(commonly used as a substitute to C93200 for non-lead applications)

Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 85.00 – 89.00%
Tin: 6.00 – 7.50%
Lead: 0.05% max.
Zinc: 2.00 – 4.00%
Nickel: 1.00% max
Bismuth: 1.7 – 2.7%

Physical Properties: Centrifugal cast
Tensile Strength, PSI:30,000 min.
Yield Strength, PSI:14,000 min.
Elongation:12% min.
Machinability Rating:70.
Minimum Operating Temperature:-450°F.
Maximum Operating Temperature:500°F.

C89835 is used as a no-lead replacement for C93200 material where lead-free material is required. Properties are similar to the C93200 material however; bismuth does not lubricate as well as lead so a constant supply of lubrication is recommended when using this material. Bunting also produces lead-free materials that replace C83600, C84400, C93700, C93800 and C94500 with bismuth alloys.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 26 - 50 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max
BB04F052080 Yes 6 1/2 in 10 in 6.3600 in 6.3900 in 10.1100 in 10.1400 in
BB04F052084 Yes 6 1/2 in 10 1/2 in 6.3600 in 6.3900 in 10.6100 in 10.6400 in
BB04F052088 Yes 6 1/2 in 11 in 6.3600 in 6.3900 in 11.1100 in 11.1400 in
BB04F052092 Yes 6 1/2 in 11 1/2 in 6.3600 in 6.3900 in 11.6100 in 11.6400 in
BB04F052096 Yes 6 1/2 in 12 in 6.3600 in 6.3900 in 12.1100 in 12.1400 in
BB04F052100 Yes 6 1/2 in 12 1/2 in 6.3600 in 6.3900 in 12.6100 in 12.6400 in
BB04F052104 Yes 6 1/2 in 13 in 6.3600 in 6.3900 in 13.1100 in 13.1400 in
BB04F056068 Yes 7 in 8 1/2 in 6.8600 in 6.8900 in 8.6100 in 8.6400 in
BB04F056072 Yes 7 in 9 in 6.8600 in 6.8900 in 9.1100 in 9.1400 in
BB04F056076 Yes 7 in 9 1/2 in 6.8600 in 6.8900 in 9.6100 in 9.6400 in
BB04F056080 Yes 7 in 10 in 6.8600 in 6.8900 in 10.1100 in 10.1400 in
BB04F056084 Yes 7 in 10 1/2 in 6.8600 in 6.8900 in 10.6100 in 10.6400 in
BB04F056088 Yes 7 in 11 in 6.8600 in 6.8900 in 11.1100 in 11.1400 in
BB04F056092 Yes 7 in 11 1/2 in 6.8600 in 6.8900 in 11.6100 in 11.6400 in
BB04F056096 Yes 7 in 12 in 6.8600 in 6.8900 in 12.1100 in 12.1400 in
BB04F056100 Yes 7 in 12 1/2 in 6.8600 in 6.8900 in 12.6100 in 12.6400 in
BB04F056104 Yes 7 in 13 in 6.8600 in 6.8900 in 13.1100 in 13.1400 in
BB04F056112 Yes 7 in 14 in 6.8600 in 6.8900 in 14.1100 in 14.1400 in
BB04F060068 Yes 7 1/2 in 8 1/2 in 7.3600 in 7.3900 in 8.6100 in 8.6400 in
BB04F060076 Yes 7 1/2 in 9 1/2 in 7.3600 in 7.3900 in 9.6100 in 9.6400 in
BB04F060080 Yes 7 1/2 in 10 in 7.3600 in 7.3900 in 10.1100 in 10.1400 in
BB04F060084 Yes 7 1/2 in 10 1/2 in 7.3600 in 7.3900 in 10.6100 in 10.6400 in
BB04F060088 Yes 7 1/2 in 11 in 7.3600 in 7.3900 in 11.1100 in 11.1400 in
BB04F060092 Yes 7 1/2 in 11 1/2 in 7.3600 in 7.3900 in 11.6100 in 11.6400 in
BB04F060096 Yes 7 1/2 in 12 in 7.3600 in 7.3900 in 12.1100 in 12.1400 in
  Results 26 - 50 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform