Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C89835 Cast Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C89835 Cast Bronze Bars

Check up to five results to perform an action.

C89835 is a “GREEN” Copper-Bismuth non-leaded alloy
(commonly used as a substitute to C93200 for non-lead applications)


Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 85.00 – 89.00%
Tin: 6.00 – 7.50%
Lead: 0.05% max.
Zinc: 2.00 – 4.00%
Nickel: 1.00% max
Bismuth: 1.7 – 2.7%

Physical Properties: Centrifugal cast
Tensile Strength, PSI:30,000 min.
Yield Strength, PSI:14,000 min.
Elongation:12% min.
Machinability Rating:70.
Minimum Operating Temperature:-450°F.
Maximum Operating Temperature:500°F.

C89835 is used as a no-lead replacement for C93200 material where lead-free material is required. Properties are similar to the C93200 material however; bismuth does not lubricate as well as lead so a constant supply of lubrication is recommended when using this material. Bunting also produces lead-free materials that replace C83600, C84400, C93700, C93800 and C94500 with bismuth alloys.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 51 - 75 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max

BB04F060100 Yes 7 1/2 in 12 1/2 in 7.3600 in 7.3900 in 12.6100 in 12.6400 in
BB04F060104 Yes 7 1/2 in 13 in 7.3600 in 7.3900 in 13.1100 in 13.1400 in
BB04F060108 Yes 7 1/2 in 13 1/2 in 7.3600 in 7.3900 in 13.6100 in 13.6400 in
BB04F064072 Yes 8 in 9 in 7.8600 in 7.8900 in 9.1100 in 9.1400 in
BB04F064076 Yes 8 in 9 1/2 in 7.8600 in 7.8900 in 9.6100 in 9.6400 in
BB04F064080 Yes 8 in 10 in 7.8600 in 7.8900 in 10.1100 in 10.1400 in
BB04F064084 Yes 8 in 10 1/2 in 7.8600 in 7.8900 in 10.6100 in 10.6400 in
BB04F064088 Yes 8 in 11 in 7.8600 in 7.8900 in 11.1100 in 11.1400 in
BB04F064092 Yes 8 in 11 1/2 in 7.8600 in 7.8900 in 11.6100 in 11.6400 in
BB04F064096 Yes 8 in 12 in 7.8600 in 7.8900 in 12.1100 in 12.1400 in
BB04F064100 Yes 8 in 12 1/2 in 7.8600 in 7.8900 in 12.6100 in 12.6400 in
BB04F064104 Yes 8 in 13 in 7.8600 in 7.8900 in 13.1100 in 13.1400 in
BB04F064108 Yes 8 in 13 1/2 in 7.8600 in 7.8900 in 13.6100 in 13.6400 in
BB04F064112 Yes 8 in 14 in 7.8600 in 7.8900 in 14.1100 in 14.1400 in
BB04F064128 Yes 8 in 16 in 7.8600 in 7.8900 in 16.1100 in 16.1400 in
BB04F068076 Yes 8 1/2 in 9 1/2 in 8.3600 in 8.3900 in 9.6100 in 9.6400 in
BB04F068080 Yes 8 1/2 in 10 in 8.3600 in 8.3900 in 10.1100 in 10.1400 in
BB04F068084 Yes 8 1/2 in 10 1/2 in 8.3600 in 8.3900 in 10.6100 in 10.6400 in
BB04F068088 Yes 8 1/2 in 11 in 8.3600 in 8.3900 in 11.1100 in 11.1400 in
BB04F068092 Yes 8 1/2 in 11 1/2 in 8.3600 in 8.3900 in 11.6100 in 11.6400 in
BB04F068096 Yes 8 1/2 in 12 in 8.3600 in 8.3900 in 12.1100 in 12.1400 in
BB04F068100 Yes 8 1/2 in 12 1/2 in 8.3600 in 8.3900 in 12.6100 in 12.6400 in
BB04F068104 Yes 8 1/2 in 13 in 8.3600 in 8.3900 in 13.1100 in 13.1400 in
BB04F068108 Yes 8 1/2 in 13 1/2 in 8.3600 in 8.3900 in 13.6100 in 13.6400 in
BB04F068112 Yes 8 1/2 in 14 in 8.3600 in 8.3900 in 14.1100 in 14.1400 in
  Results 51 - 75 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform