Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C90700 (SAE 65) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C90700 (SAE 65) Bronze Bars

 
Check up to five results to perform an action.

C90700 is a “GREEN” non-leaded alloy
Tin Bronze
CDA 907
SAE 65 89-11
ASTM B271

Solid bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 88.00 – 90.00%
Tin: 10.00 – 12.00%
Lead: 0.50% max.
Zinc: 0.50% max.
Physical Properties: Centrifugal Cast
Tensile Strength PSI: 50,000 min.
Yield Strength PSI: 28,000 min.
Elongation: 12% min.
Brinell Hardness (500 kg load): 100 typical
Machinability Rating: 20
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 550°F

C90700 is used for bearings and gears where higher strength and load-carrying ability is required. C90700 has good wear resistance but should be used with hardened steel shafts (300-400 HB). Due to the lack of lead, this material requires constant lubrication, generally grease.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 76 - 100 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max
B907F072080 Yes 9 in 10 in 8.8600 in 8.8900 in 10.1100 in 10.1400 in
B907F072084 Yes 9 in 10 1/2 in 8.8600 in 8.8900 in 10.6100 in 10.6400 in
B907F072088 Yes 9 in 11 in 8.8600 in 8.8900 in 11.1100 in 11.1400 in
B907F072092 Yes 9 in 11 1/2 in 8.8600 in 8.8900 in 11.6100 in 11.6400 in
B907F072096 Yes 9 in 12 in 8.8600 in 8.8900 in 12.1100 in 12.1400 in
B907F072100 Yes 9 in 12 1/2 in 8.8600 in 8.8900 in 12.6100 in 12.6400 in
B907F072104 Yes 9 in 13 in 8.8600 in 8.8900 in 13.1100 in 13.1400 in
B907F072108 Yes 9 in 13 1/2 in 8.8600 in 8.8900 in 13.6100 in 13.6400 in
B907F072112 Yes 9 in 14 in 8.8600 in 8.8900 in 14.1100 in 14.1400 in
B907F076084 Yes 9 1/2 in 10 1/2 in 9.3600 in 9.3900 in 10.6100 in 10.6400 in
B907F076088 Yes 9 1/2 in 11 in 9.3600 in 9.3900 in 11.1100 in 11.1400 in
B907F076092 Yes 9 1/2 in 11 1/2 in 9.3600 in 9.3900 in 11.6100 in 11.6400 in
B907F076096 Yes 9 1/2 in 12 in 9.3600 in 9.3900 in 12.1100 in 12.1400 in
B907F076100 Yes 9 1/2 in 12 1/2 in 9.3600 in 9.3900 in 12.6100 in 12.6400 in
B907F076104 Yes 9 1/2 in 13 in 9.3600 in 9.3900 in 13.1100 in 13.1400 in
B907F076108 Yes 9 1/2 in 13 1/2 in 9.3600 in 9.3900 in 13.6100 in 13.6400 in
B907F076112 Yes 9 1/2 in 14 in 9.3600 in 9.3900 in 14.1100 in 14.1400 in
B907F080088 Yes 10 in 11 in 9.8600 in 9.8900 in 11.1100 in 11.1400 in
B907F080092 Yes 10 in 11 1/2 in 9.8600 in 9.8900 in 11.6100 in 11.6400 in
B907F080096 Yes 10 in 12 in 9.8600 in 9.8900 in 12.1100 in 12.1400 in
B907F080100 Yes 10 in 12 1/2 in 9.8600 in 9.8900 in 12.6100 in 12.6400 in
B907F080104 Yes 10 in 13 in 9.8600 in 9.8900 in 13.1100 in 13.1400 in
B907F080108 Yes 10 in 13 1/2 in 9.8600 in 9.8900 in 13.6100 in 13.6400 in
B907F080112 Yes 10 in 14 in 9.8600 in 9.8900 in 14.1100 in 14.1400 in
B907F080128 Yes 10 in 16 in 9.8600 in 9.8900 in 16.1100 in 16.1400 in
  Results 76 - 100 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform