Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C90700 (SAE 65) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C90700 (SAE 65) Bronze Bars

Check up to five results to perform an action.

C90700 is a “GREEN” non-leaded alloy
Tin Bronze
CDA 907
SAE 65 89-11
ASTM B271

Solid bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 88.00 – 90.00%
Tin: 10.00 – 12.00%
Lead: 0.50% max.
Zinc: 0.50% max.
Physical Properties: Centrifugal Cast
Tensile Strength PSI: 50,000 min.
Yield Strength PSI: 28,000 min.
Elongation: 12% min.
Brinell Hardness (500 kg load): 100 typical
Machinability Rating: 20
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 550°F

C90700 is used for bearings and gears where higher strength and load-carrying ability is required. C90700 has good wear resistance but should be used with hardened steel shafts (300-400 HB). Due to the lack of lead, this material requires constant lubrication, generally grease.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 1 - 25 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max

Sort by
B907F048068 Yes 6 in 8 1/2 in 5.8600 in 5.8900 in 8.6100 in 8.6400 in
B907F052068 Yes 6 1/2 in 8 1/2 in 6.3600 in 6.3900 in 8.6100 in 8.6400 in
B907F056068 Yes 7 in 8 1/2 in 6.8600 in 6.8900 in 8.6100 in 8.6400 in
B907F060068 Yes 7 1/2 in 8 1/2 in 7.3600 in 7.3900 in 8.6100 in 8.6400 in
B907F040072 Yes 5 in 9 in 4.8600 in 4.8900 in 9.1100 in 9.1400 in
B907F048072 Yes 6 in 9 in 5.8600 in 5.8900 in 9.1100 in 9.1400 in
B907F056072 Yes 7 in 9 in 6.8600 in 6.8900 in 9.1100 in 9.1400 in
B907F064072 Yes 8 in 9 in 7.8600 in 7.8900 in 9.1100 in 9.1400 in
B907F052076 Yes 6 1/2 in 9 1/2 in 6.3600 in 6.3900 in 9.6100 in 9.6400 in
B907F056076 Yes 7 in 9 1/2 in 6.8600 in 6.8900 in 9.6100 in 9.6400 in
B907F060076 Yes 7 1/2 in 9 1/2 in 7.3600 in 7.3900 in 9.6100 in 9.6400 in
B907F064076 Yes 8 in 9 1/2 in 7.8600 in 7.8900 in 9.6100 in 9.6400 in
B907F068076 Yes 8 1/2 in 9 1/2 in 8.3600 in 8.3900 in 9.6100 in 9.6400 in
B907F040080 Yes 5 in 10 in 4.8600 in 4.8900 in 10.1100 in 10.1400 in
B907F044080 Yes 5 1/2 in 10 in 5.3600 in 5.3900 in 10.1100 in 10.1400 in
B907F048080 Yes 6 in 10 in 5.8600 in 5.8900 in 10.1100 in 10.1400 in
B907F052080 Yes 6 1/2 in 10 in 6.3600 in 6.3900 in 10.1100 in 10.1400 in
B907F056080 Yes 7 in 10 in 6.8600 in 6.8900 in 10.1100 in 10.1400 in
B907F060080 Yes 7 1/2 in 10 in 7.3600 in 7.3900 in 10.1100 in 10.1400 in
B907F064080 Yes 8 in 10 in 7.8600 in 7.8900 in 10.1100 in 10.1400 in
B907F068080 Yes 8 1/2 in 10 in 8.3600 in 8.3900 in 10.1100 in 10.1400 in
B907F072080 Yes 9 in 10 in 8.8600 in 8.8900 in 10.1100 in 10.1400 in
B907F040084 Yes 5 in 10 1/2 in 4.8600 in 4.8900 in 10.6100 in 10.6400 in
B907F044084 Yes 5 1/2 in 10 1/2 in 5.3600 in 5.3900 in 10.6100 in 10.6400 in
B907F048084 Yes 6 in 10 1/2 in 5.8600 in 5.8900 in 10.6100 in 10.6400 in
  Results 1 - 25 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform