Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C90700 (SAE 65) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C90700 (SAE 65) Bronze Bars

 
Check up to five results to perform an action.

C90700 is a “GREEN” non-leaded alloy
Tin Bronze
CDA 907
SAE 65 89-11
ASTM B271

Solid bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 88.00 – 90.00%
Tin: 10.00 – 12.00%
Lead: 0.50% max.
Zinc: 0.50% max.
Physical Properties: Centrifugal Cast
Tensile Strength PSI: 50,000 min.
Yield Strength PSI: 28,000 min.
Elongation: 12% min.
Brinell Hardness (500 kg load): 100 typical
Machinability Rating: 20
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 550°F

C90700 is used for bearings and gears where higher strength and load-carrying ability is required. C90700 has good wear resistance but should be used with hardened steel shafts (300-400 HB). Due to the lack of lead, this material requires constant lubrication, generally grease.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 1 - 25 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max

Sort by
B907F152160 Yes 19 in 20 in 18.8600 in 18.8900 in 20.1100 in 20.1400 in
B907F148160 Yes 18 1/2 in 20 in 18.3600 in 18.3900 in 20.1100 in 20.1400 in
B907F144160 Yes 18 in 20 in 17.8600 in 17.8900 in 20.1100 in 20.1400 in
B907F140160 Yes 17 1/2 in 20 in 17.3600 in 17.3900 in 20.1100 in 20.1400 in
B907F148156 Yes 18 1/2 in 19 1/2 in 18.3600 in 18.3900 in 19.6100 in 19.6400 in
B907F144156 Yes 18 in 19 1/2 in 17.8600 in 17.8900 in 19.6100 in 19.6400 in
B907F140156 Yes 17 1/2 in 19 1/2 in 17.3600 in 17.3900 in 19.6100 in 19.6400 in
B907F136156 Yes 17 in 19 1/2 in 16.8600 in 16.8900 in 19.6100 in 19.6400 in
B907F132156 Yes 16 1/2 in 19 1/2 in 16.3600 in 16.3900 in 19.6100 in 19.6400 in
B907F144152 Yes 18 in 19 in 17.8600 in 17.8900 in 19.1100 in 19.1400 in
B907F140152 Yes 17 1/2 in 19 in 17.3600 in 17.3900 in 19.1100 in 19.1400 in
B907F136152 Yes 17 in 19 in 16.8600 in 16.8900 in 19.1100 in 19.1400 in
B907F132152 Yes 16 1/2 in 19 in 16.3600 in 16.3900 in 19.1100 in 19.1400 in
B907F128152 Yes 16 in 19 in 15.8600 in 15.8900 in 19.1100 in 19.1400 in
B907F140148 Yes 17 1/2 in 18 1/2 in 17.3600 in 17.3900 in 18.6100 in 18.6400 in
B907F136148 Yes 17 in 18 1/2 in 16.8600 in 16.8900 in 18.6100 in 18.6400 in
B907F132148 Yes 16 1/2 in 18 1/2 in 16.3600 in 16.3900 in 18.6100 in 18.6400 in
B907F128148 Yes 16 in 18 1/2 in 15.8600 in 15.8900 in 18.6100 in 18.6400 in
B907F124148 Yes 15 1/2 in 18 1/2 in 15.3600 in 15.3900 in 18.6100 in 18.6400 in
B907F120148 Yes 15 in 18 1/2 in 14.8600 in 14.8900 in 18.6100 in 18.6400 in
B907F136144 Yes 17 in 18 in 16.8600 in 16.8900 in 18.1100 in 18.1400 in
B907F132144 Yes 16 1/2 in 18 in 16.3600 in 16.3900 in 18.1100 in 18.1400 in
B907F128144 Yes 16 in 18 in 15.8600 in 15.8900 in 18.1100 in 18.1400 in
B907F124144 Yes 15 1/2 in 18 in 15.3600 in 15.3900 in 18.1100 in 18.1400 in
B907F120144 Yes 15 in 18 in 14.8600 in 14.8900 in 18.1100 in 18.1400 in
  Results 1 - 25 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform