Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C90700 (SAE 65) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C90700 (SAE 65) Bronze Bars

 
Check up to five results to perform an action.

C90700 is a “GREEN” non-leaded alloy
Tin Bronze
CDA 907
SAE 65 89-11
ASTM B271

Solid bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 88.00 – 90.00%
Tin: 10.00 – 12.00%
Lead: 0.50% max.
Zinc: 0.50% max.
Physical Properties: Centrifugal Cast
Tensile Strength PSI: 50,000 min.
Yield Strength PSI: 28,000 min.
Elongation: 12% min.
Brinell Hardness (500 kg load): 100 typical
Machinability Rating: 20
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 550°F

C90700 is used for bearings and gears where higher strength and load-carrying ability is required. C90700 has good wear resistance but should be used with hardened steel shafts (300-400 HB). Due to the lack of lead, this material requires constant lubrication, generally grease.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 26 - 50 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max

Sort by
B907F112144 Yes 14 in 18 in 13.8600 in 13.8900 in 18.1100 in 18.1400 in
B907F096144 Yes 12 in 18 in 11.8600 in 11.8900 in 18.1100 in 18.1400 in
B907F080144 Yes 10 in 18 in 9.8600 in 9.8900 in 18.1100 in 18.1400 in
B907F132140 Yes 16 1/2 in 17 1/2 in 16.3600 in 16.3900 in 17.6100 in 17.6400 in
B907F128140 Yes 16 in 17 1/2 in 15.8600 in 15.8900 in 17.6100 in 17.6400 in
B907F124140 Yes 15 1/2 in 17 1/2 in 15.3600 in 15.3900 in 17.6100 in 17.6400 in
B907F120140 Yes 15 in 17 1/2 in 14.8600 in 14.8900 in 17.6100 in 17.6400 in
B907F128136 Yes 16 in 17 in 15.8600 in 15.8900 in 17.1100 in 17.1400 in
B907F124136 Yes 15 1/2 in 17 in 15.3600 in 15.3900 in 17.1100 in 17.1400 in
B907F120136 Yes 15 in 17 in 14.8600 in 14.8900 in 17.1100 in 17.1400 in
B907F116136 Yes 14 1/2 in 17 in 14.3600 in 14.3900 in 17.1100 in 17.1400 in
B907F112136 Yes 14 in 17 in 13.8600 in 13.8900 in 17.1100 in 17.1400 in
B907F108136 Yes 13 1/2 in 17 in 13.3600 in 13.3900 in 17.1100 in 17.1400 in
B907F124132 Yes 15 1/2 in 16 1/2 in 15.3600 in 15.3900 in 16.6100 in 16.6400 in
B907F120132 Yes 15 in 16 1/2 in 14.8600 in 14.8900 in 16.6100 in 16.6400 in
B907F116132 Yes 14 1/2 in 16 1/2 in 14.3600 in 14.3900 in 16.6100 in 16.6400 in
B907F112132 Yes 14 in 16 1/2 in 13.8600 in 13.8900 in 16.6100 in 16.6400 in
B907F108132 Yes 13 1/2 in 16 1/2 in 13.3600 in 13.3900 in 16.6100 in 16.6400 in
B907F120128 Yes 15 in 16 in 14.8600 in 14.8900 in 16.1100 in 16.1400 in
B907F116128 Yes 14 1/2 in 16 in 14.3600 in 14.3900 in 16.1100 in 16.1400 in
B907F112128 Yes 14 in 16 in 13.8600 in 13.8900 in 16.1100 in 16.1400 in
B907F108128 Yes 13 1/2 in 16 in 13.3600 in 13.3900 in 16.1100 in 16.1400 in
B907F104128 Yes 13 in 16 in 12.8600 in 12.8900 in 16.1100 in 16.1400 in
B907F100128 Yes 12 1/2 in 16 in 12.3600 in 12.3900 in 16.1100 in 16.1400 in
B907F096128 Yes 12 in 16 in 11.8600 in 11.8900 in 16.1100 in 16.1400 in
  Results 26 - 50 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform