Southeast Non-Ferrous Alloys®
 | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Quotes 0 Items
SENFA® > Centrifugal Cast Cored Bars > C93700 (SAE 64) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93700 (SAE 64) Bronze Bars

Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 937
SAE 64 83-10-10
ASTM B271


Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 78.00 – 82.00%
Tin: 9.00 – 11.00%
Lead: 8.00 – 11.00%

Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 30,000 min.
Yield Strength, PSI: 12,000 min.
Elongation: 15% min.
Brinell Hardness (500 kg load): 60 typical
Machinability Rating 80
Minimum Operating Temperature -450°F
Maximum Operating Temperature 500°F

C93700 has higher tin and lead than C93200 and is used in bearings with higher speeds and loads. It has increased corrosion and oxidation resistance, with good anti-frictional properties, good load-carrying ability and excellent machinability. C93700 can be used in applications where lubrication may be low or interrupted.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 26 - 50 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max

B937F052080 Yes 6 1/2 in 10 in 6.3600 in 6.3900 in 10.1100 in 10.1400 in
B937F052084 Yes 6 1/2 in 10 1/2 in 6.3600 in 6.3900 in 10.6100 in 10.6400 in
B937F052088 Yes 6 1/2 in 11 in 6.3600 in 6.3900 in 11.1100 in 11.1400 in
B937F052092 Yes 6 1/2 in 11 1/2 in 6.3600 in 6.3900 in 11.6100 in 11.6400 in
B937F052096 Yes 6 1/2 in 12 in 6.3600 in 6.3900 in 12.1100 in 12.1400 in
B937F052100 Yes 6 1/2 in 12 1/2 in 6.3600 in 6.3900 in 12.6100 in 12.6400 in
B937F052104 Yes 6 1/2 in 13 in 6.3600 in 6.3900 in 13.1100 in 13.1400 in
B937F056068 Yes 7 in 8 1/2 in 6.8600 in 6.8900 in 8.6100 in 8.6400 in
B937F056072 Yes 7 in 9 in 6.8600 in 6.8900 in 9.1100 in 9.1400 in
B937F056076 Yes 7 in 9 1/2 in 6.8600 in 6.8900 in 9.6100 in 9.6400 in
B937F056080 Yes 7 in 10 in 6.8600 in 6.8900 in 10.1100 in 10.1400 in
B937F056084 Yes 7 in 10 1/2 in 6.8600 in 6.8900 in 10.6100 in 10.6400 in
B937F056088 Yes 7 in 11 in 6.8600 in 6.8900 in 11.1100 in 11.1400 in
B937F056092 Yes 7 in 11 1/2 in 6.8600 in 6.8900 in 11.6100 in 11.6400 in
B937F056096 Yes 7 in 12 in 6.8600 in 6.8900 in 12.1100 in 12.1400 in
B937F056100 Yes 7 in 12 1/2 in 6.8600 in 6.8900 in 12.6100 in 12.6400 in
B937F056104 Yes 7 in 13 in 6.8600 in 6.8900 in 13.1100 in 13.1400 in
B937F056112 Yes 7 in 14 in 6.8600 in 6.8900 in 14.1100 in 14.1400 in
B937F060068 Yes 7 1/2 in 8 1/2 in 7.3600 in 7.3900 in 8.6100 in 8.6400 in
B937F060076 Yes 7 1/2 in 9 1/2 in 7.3600 in 7.3900 in 9.6100 in 9.6400 in
B937F060080 Yes 7 1/2 in 10 in 7.3600 in 7.3900 in 10.1100 in 10.1400 in
B937F060084 Yes 7 1/2 in 10 1/2 in 7.3600 in 7.3900 in 10.6100 in 10.6400 in
B937F060088 Yes 7 1/2 in 11 in 7.3600 in 7.3900 in 11.1100 in 11.1400 in
B937F060092 Yes 7 1/2 in 11 1/2 in 7.3600 in 7.3900 in 11.6100 in 11.6400 in
B937F060096 Yes 7 1/2 in 12 in 7.3600 in 7.3900 in 12.1100 in 12.1400 in
  Results 26 - 50 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2019 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform