Southeast Non-Ferrous Alloys®
 | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Quotes 0 Items
SENFA® > Centrifugal Cast Cored Bars > C93700 (SAE 64) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93700 (SAE 64) Bronze Bars

Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 937
SAE 64 83-10-10
ASTM B271


Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 78.00 – 82.00%
Tin: 9.00 – 11.00%
Lead: 8.00 – 11.00%

Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 30,000 min.
Yield Strength, PSI: 12,000 min.
Elongation: 15% min.
Brinell Hardness (500 kg load): 60 typical
Machinability Rating 80
Minimum Operating Temperature -450°F
Maximum Operating Temperature 500°F

C93700 has higher tin and lead than C93200 and is used in bearings with higher speeds and loads. It has increased corrosion and oxidation resistance, with good anti-frictional properties, good load-carrying ability and excellent machinability. C93700 can be used in applications where lubrication may be low or interrupted.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 76 - 100 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max

B937F072080 Yes 9 in 10 in 8.8600 in 8.8900 in 10.1100 in 10.1400 in
B937F072084 Yes 9 in 10 1/2 in 8.8600 in 8.8900 in 10.6100 in 10.6400 in
B937F072088 Yes 9 in 11 in 8.8600 in 8.8900 in 11.1100 in 11.1400 in
B937F072092 Yes 9 in 11 1/2 in 8.8600 in 8.8900 in 11.6100 in 11.6400 in
B937F072096 Yes 9 in 12 in 8.8600 in 8.8900 in 12.1100 in 12.1400 in
B937F072100 Yes 9 in 12 1/2 in 8.8600 in 8.8900 in 12.6100 in 12.6400 in
B937F072104 Yes 9 in 13 in 8.8600 in 8.8900 in 13.1100 in 13.1400 in
B937F072108 Yes 9 in 13 1/2 in 8.8600 in 8.8900 in 13.6100 in 13.6400 in
B937F072112 Yes 9 in 14 in 8.8600 in 8.8900 in 14.1100 in 14.1400 in
B937F076084 Yes 9 1/2 in 10 1/2 in 9.3600 in 9.3900 in 10.6100 in 10.6400 in
B937F076088 Yes 9 1/2 in 11 in 9.3600 in 9.3900 in 11.1100 in 11.1400 in
B937F076092 Yes 9 1/2 in 11 1/2 in 9.3600 in 9.3900 in 11.6100 in 11.6400 in
B937F076096 Yes 9 1/2 in 12 in 9.3600 in 9.3900 in 12.1100 in 12.1400 in
B937F076100 Yes 9 1/2 in 12 1/2 in 9.3600 in 9.3900 in 12.6100 in 12.6400 in
B937F076104 Yes 9 1/2 in 13 in 9.3600 in 9.3900 in 13.1100 in 13.1400 in
B937F076108 Yes 9 1/2 in 13 1/2 in 9.3600 in 9.3900 in 13.6100 in 13.6400 in
B937F076112 Yes 9 1/2 in 14 in 9.3600 in 9.3900 in 14.1100 in 14.1400 in
B937F080088 Yes 10 in 11 in 9.8600 in 9.8900 in 11.1100 in 11.1400 in
B937F080092 Yes 10 in 11 1/2 in 9.8600 in 9.8900 in 11.6100 in 11.6400 in
B937F080096 Yes 10 in 12 in 9.8600 in 9.8900 in 12.1100 in 12.1400 in
B937F080100 Yes 10 in 12 1/2 in 9.8600 in 9.8900 in 12.6100 in 12.6400 in
B937F080104 Yes 10 in 13 in 9.8600 in 9.8900 in 13.1100 in 13.1400 in
B937F080108 Yes 10 in 13 1/2 in 9.8600 in 9.8900 in 13.6100 in 13.6400 in
B937F080112 Yes 10 in 14 in 9.8600 in 9.8900 in 14.1100 in 14.1400 in
B937F080128 Yes 10 in 16 in 9.8600 in 9.8900 in 16.1100 in 16.1400 in
  Results 76 - 100 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2019 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform