Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C93700 (SAE 64) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93700 (SAE 64) Bronze Bars

Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 937
SAE 64 83-10-10
ASTM B271


Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 78.00 – 82.00%
Tin: 9.00 – 11.00%
Lead: 8.00 – 11.00%

Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 30,000 min.
Yield Strength, PSI: 12,000 min.
Elongation: 15% min.
Brinell Hardness (500 kg load): 60 typical
Machinability Rating 80
Minimum Operating Temperature -450°F
Maximum Operating Temperature 500°F

C93700 has higher tin and lead than C93200 and is used in bearings with higher speeds and loads. It has increased corrosion and oxidation resistance, with good anti-frictional properties, good load-carrying ability and excellent machinability. C93700 can be used in applications where lubrication may be low or interrupted.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 151 - 175 of 192 « 6 7 8 

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max

B937F112132 Yes 14 in 16 1/2 in 13.8600 in 13.8900 in 16.6100 in 16.6400 in
B937F112136 Yes 14 in 17 in 13.8600 in 13.8900 in 17.1100 in 17.1400 in
B937F112144 Yes 14 in 18 in 13.8600 in 13.8900 in 18.1100 in 18.1400 in
B937F116124 Yes 14 1/2 in 15 1/2 in 14.3600 in 14.3900 in 15.6100 in 15.6400 in
B937F116128 Yes 14 1/2 in 16 in 14.3600 in 14.3900 in 16.1100 in 16.1400 in
B937F116132 Yes 14 1/2 in 16 1/2 in 14.3600 in 14.3900 in 16.6100 in 16.6400 in
B937F116136 Yes 14 1/2 in 17 in 14.3600 in 14.3900 in 17.1100 in 17.1400 in
B937F120128 Yes 15 in 16 in 14.8600 in 14.8900 in 16.1100 in 16.1400 in
B937F120132 Yes 15 in 16 1/2 in 14.8600 in 14.8900 in 16.6100 in 16.6400 in
B937F120136 Yes 15 in 17 in 14.8600 in 14.8900 in 17.1100 in 17.1400 in
B937F120140 Yes 15 in 17 1/2 in 14.8600 in 14.8900 in 17.6100 in 17.6400 in
B937F120144 Yes 15 in 18 in 14.8600 in 14.8900 in 18.1100 in 18.1400 in
B937F120148 Yes 15 in 18 1/2 in 14.8600 in 14.8900 in 18.6100 in 18.6400 in
B937F124132 Yes 15 1/2 in 16 1/2 in 15.3600 in 15.3900 in 16.6100 in 16.6400 in
B937F124136 Yes 15 1/2 in 17 in 15.3600 in 15.3900 in 17.1100 in 17.1400 in
B937F124140 Yes 15 1/2 in 17 1/2 in 15.3600 in 15.3900 in 17.6100 in 17.6400 in
B937F124144 Yes 15 1/2 in 18 in 15.3600 in 15.3900 in 18.1100 in 18.1400 in
B937F124148 Yes 15 1/2 in 18 1/2 in 15.3600 in 15.3900 in 18.6100 in 18.6400 in
B937F128136 Yes 16 in 17 in 15.8600 in 15.8900 in 17.1100 in 17.1400 in
B937F128140 Yes 16 in 17 1/2 in 15.8600 in 15.8900 in 17.6100 in 17.6400 in
B937F128144 Yes 16 in 18 in 15.8600 in 15.8900 in 18.1100 in 18.1400 in
B937F128148 Yes 16 in 18 1/2 in 15.8600 in 15.8900 in 18.6100 in 18.6400 in
B937F128152 Yes 16 in 19 in 15.8600 in 15.8900 in 19.1100 in 19.1400 in
B937F132140 Yes 16 1/2 in 17 1/2 in 16.3600 in 16.3900 in 17.6100 in 17.6400 in
B937F132144 Yes 16 1/2 in 18 in 16.3600 in 16.3900 in 18.1100 in 18.1400 in
  Results 151 - 175 of 192 « 6 7 8 
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform