Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C93700 (SAE 64) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93700 (SAE 64) Bronze Bars

Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 937
SAE 64 83-10-10
ASTM B271


Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 78.00 – 82.00%
Tin: 9.00 – 11.00%
Lead: 8.00 – 11.00%

Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 30,000 min.
Yield Strength, PSI: 12,000 min.
Elongation: 15% min.
Brinell Hardness (500 kg load): 60 typical
Machinability Rating 80
Minimum Operating Temperature -450°F
Maximum Operating Temperature 500°F

C93700 has higher tin and lead than C93200 and is used in bearings with higher speeds and loads. It has increased corrosion and oxidation resistance, with good anti-frictional properties, good load-carrying ability and excellent machinability. C93700 can be used in applications where lubrication may be low or interrupted.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 126 - 150 of 192 « 6 7 8 

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

Sort by

O.D. Min

O.D. Max

B937F096116 Yes 12 in 14 1/2 in 11.8600 in 11.8900 in 14.6100 in 14.6400 in
B937F096120 Yes 12 in 15 in 11.8600 in 11.8900 in 15.1100 in 15.1400 in
B937F096124 Yes 12 in 15 1/2 in 11.8600 in 11.8900 in 15.6100 in 15.6400 in
B937F096128 Yes 12 in 16 in 11.8600 in 11.8900 in 16.1100 in 16.1400 in
B937F096144 Yes 12 in 18 in 11.8600 in 11.8900 in 18.1100 in 18.1400 in
B937F100108 Yes 12 1/2 in 13 1/2 in 12.3600 in 12.3900 in 13.6100 in 13.6400 in
B937F100112 Yes 12 1/2 in 14 in 12.3600 in 12.3900 in 14.1100 in 14.1400 in
B937F100116 Yes 12 1/2 in 14 1/2 in 12.3600 in 12.3900 in 14.6100 in 14.6400 in
B937F100120 Yes 12 1/2 in 15 in 12.3600 in 12.3900 in 15.1100 in 15.1400 in
B937F100124 Yes 12 1/2 in 15 1/2 in 12.3600 in 12.3900 in 15.6100 in 15.6400 in
B937F100128 Yes 12 1/2 in 16 in 12.3600 in 12.3900 in 16.1100 in 16.1400 in
B937F104112 Yes 13 in 14 in 12.8600 in 12.8900 in 14.1100 in 14.1400 in
B937F104116 Yes 13 in 14 1/2 in 12.8600 in 12.8900 in 14.6100 in 14.6400 in
B937F104120 Yes 13 in 15 in 12.8600 in 12.8900 in 15.1100 in 15.1400 in
B937F104124 Yes 13 in 15 1/2 in 12.8600 in 12.8900 in 15.6100 in 15.6400 in
B937F104128 Yes 13 in 16 in 12.8600 in 12.8900 in 16.1100 in 16.1400 in
B937F108116 Yes 13 1/2 in 14 1/2 in 13.3600 in 13.3900 in 14.6100 in 14.6400 in
B937F108120 Yes 13 1/2 in 15 in 13.3600 in 13.3900 in 15.1100 in 15.1400 in
B937F108124 Yes 13 1/2 in 15 1/2 in 13.3600 in 13.3900 in 15.6100 in 15.6400 in
B937F108128 Yes 13 1/2 in 16 in 13.3600 in 13.3900 in 16.1100 in 16.1400 in
B937F108132 Yes 13 1/2 in 16 1/2 in 13.3600 in 13.3900 in 16.6100 in 16.6400 in
B937F108136 Yes 13 1/2 in 17 in 13.3600 in 13.3900 in 17.1100 in 17.1400 in
B937F112120 Yes 14 in 15 in 13.8600 in 13.8900 in 15.1100 in 15.1400 in
B937F112124 Yes 14 in 15 1/2 in 13.8600 in 13.8900 in 15.6100 in 15.6400 in
B937F112128 Yes 14 in 16 in 13.8600 in 13.8900 in 16.1100 in 16.1400 in
  Results 126 - 150 of 192 « 6 7 8 
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform