Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C93700 (SAE 64) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93700 (SAE 64) Bronze Bars

Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 937
SAE 64 83-10-10
ASTM B271


Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 78.00 – 82.00%
Tin: 9.00 – 11.00%
Lead: 8.00 – 11.00%

Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 30,000 min.
Yield Strength, PSI: 12,000 min.
Elongation: 15% min.
Brinell Hardness (500 kg load): 60 typical
Machinability Rating 80
Minimum Operating Temperature -450°F
Maximum Operating Temperature 500°F

C93700 has higher tin and lead than C93200 and is used in bearings with higher speeds and loads. It has increased corrosion and oxidation resistance, with good anti-frictional properties, good load-carrying ability and excellent machinability. C93700 can be used in applications where lubrication may be low or interrupted.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 101 - 125 of 192  1 2 3 4 5 »  

Item #

Sort by

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max

B937F080144 Yes 10 in 18 in 9.8600 in 9.8900 in 18.1100 in 18.1400 in
B937F084092 Yes 10 1/2 in 11 1/2 in 10.3600 in 10.3900 in 11.6100 in 11.6400 in
B937F084096 Yes 10 1/2 in 12 in 10.3600 in 10.3900 in 12.1100 in 12.1400 in
B937F084100 Yes 10 1/2 in 12 1/2 in 10.3600 in 10.3900 in 12.6100 in 12.6400 in
B937F084104 Yes 10 1/2 in 13 in 10.3600 in 10.3900 in 13.1100 in 13.1400 in
B937F084108 Yes 10 1/2 in 13 1/2 in 10.3600 in 10.3900 in 13.6100 in 13.6400 in
B937F084112 Yes 10 1/2 in 14 in 10.3600 in 10.3900 in 14.1100 in 14.1400 in
B937F084116 Yes 10 1/2 in 14 1/2 in 10.3600 in 10.3900 in 14.6100 in 14.6400 in
B937F084120 Yes 10 1/2 in 15 in 10.3600 in 10.3900 in 15.1100 in 15.1400 in
B937F088096 Yes 11 in 12 in 10.8600 in 10.8900 in 12.1100 in 12.1400 in
B937F088100 Yes 11 in 12 1/2 in 10.8600 in 10.8900 in 12.6100 in 12.6400 in
B937F088104 Yes 11 in 13 in 10.8600 in 10.8900 in 13.1100 in 13.1400 in
B937F088108 Yes 11 in 13 1/2 in 10.8600 in 10.8900 in 13.6100 in 13.6400 in
B937F088112 Yes 11 in 14 in 10.8600 in 10.8900 in 14.1100 in 14.1400 in
B937F088116 Yes 11 in 14 1/2 in 10.8600 in 10.8900 in 14.6100 in 14.6400 in
B937F088120 Yes 11 in 15 in 10.8600 in 10.8900 in 15.1100 in 15.1400 in
B937F092100 Yes 11 1/2 in 12 1/2 in 11.3600 in 11.3900 in 12.6100 in 12.6400 in
B937F092104 Yes 11 1/2 in 13 in 11.3600 in 11.3900 in 13.1100 in 13.1400 in
B937F092108 Yes 11 1/2 in 13 1/2 in 11.3600 in 11.3900 in 13.6100 in 13.6400 in
B937F092112 Yes 11 1/2 in 14 in 11.3600 in 11.3900 in 14.1100 in 14.1400 in
B937F092116 Yes 11 1/2 in 14 1/2 in 11.3600 in 11.3900 in 14.6100 in 14.6400 in
B937F092120 Yes 11 1/2 in 15 in 11.3600 in 11.3900 in 15.1100 in 15.1400 in
B937F096104 Yes 12 in 13 in 11.8600 in 11.8900 in 13.1100 in 13.1400 in
B937F096108 Yes 12 in 13 1/2 in 11.8600 in 11.8900 in 13.6100 in 13.6400 in
B937F096112 Yes 12 in 14 in 11.8600 in 11.8900 in 14.1100 in 14.1400 in
  Results 101 - 125 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform