Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C93700 (SAE 64) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93700 (SAE 64) Bronze Bars

Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 937
SAE 64 83-10-10
ASTM B271


Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 78.00 – 82.00%
Tin: 9.00 – 11.00%
Lead: 8.00 – 11.00%

Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 30,000 min.
Yield Strength, PSI: 12,000 min.
Elongation: 15% min.
Brinell Hardness (500 kg load): 60 typical
Machinability Rating 80
Minimum Operating Temperature -450°F
Maximum Operating Temperature 500°F

C93700 has higher tin and lead than C93200 and is used in bearings with higher speeds and loads. It has increased corrosion and oxidation resistance, with good anti-frictional properties, good load-carrying ability and excellent machinability. C93700 can be used in applications where lubrication may be low or interrupted.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 1 - 25 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

Sort by

I.D. Min

I.D. Max

O.D. Min

O.D. Max

B937F048068 Yes 6 in 8 1/2 in 5.8600 in 5.8900 in 8.6100 in 8.6400 in
B937F052068 Yes 6 1/2 in 8 1/2 in 6.3600 in 6.3900 in 8.6100 in 8.6400 in
B937F056068 Yes 7 in 8 1/2 in 6.8600 in 6.8900 in 8.6100 in 8.6400 in
B937F060068 Yes 7 1/2 in 8 1/2 in 7.3600 in 7.3900 in 8.6100 in 8.6400 in
B937F064072 Yes 8 in 9 in 7.8600 in 7.8900 in 9.1100 in 9.1400 in
B937F056072 Yes 7 in 9 in 6.8600 in 6.8900 in 9.1100 in 9.1400 in
B937F048072 Yes 6 in 9 in 5.8600 in 5.8900 in 9.1100 in 9.1400 in
B937F040072 Yes 5 in 9 in 4.8600 in 4.8900 in 9.1100 in 9.1400 in
B937F056076 Yes 7 in 9 1/2 in 6.8600 in 6.8900 in 9.6100 in 9.6400 in
B937F052076 Yes 6 1/2 in 9 1/2 in 6.3600 in 6.3900 in 9.6100 in 9.6400 in
B937F064076 Yes 8 in 9 1/2 in 7.8600 in 7.8900 in 9.6100 in 9.6400 in
B937F060076 Yes 7 1/2 in 9 1/2 in 7.3600 in 7.3900 in 9.6100 in 9.6400 in
B937F068076 Yes 8 1/2 in 9 1/2 in 8.3600 in 8.3900 in 9.6100 in 9.6400 in
B937F068080 Yes 8 1/2 in 10 in 8.3600 in 8.3900 in 10.1100 in 10.1400 in
B937F072080 Yes 9 in 10 in 8.8600 in 8.8900 in 10.1100 in 10.1400 in
B937F060080 Yes 7 1/2 in 10 in 7.3600 in 7.3900 in 10.1100 in 10.1400 in
B937F064080 Yes 8 in 10 in 7.8600 in 7.8900 in 10.1100 in 10.1400 in
B937F052080 Yes 6 1/2 in 10 in 6.3600 in 6.3900 in 10.1100 in 10.1400 in
B937F056080 Yes 7 in 10 in 6.8600 in 6.8900 in 10.1100 in 10.1400 in
B937F040080 Yes 5 in 10 in 4.8600 in 4.8900 in 10.1100 in 10.1400 in
B937F044080 Yes 5 1/2 in 10 in 5.3600 in 5.3900 in 10.1100 in 10.1400 in
B937F048080 Yes 6 in 10 in 5.8600 in 5.8900 in 10.1100 in 10.1400 in
B937F048084 Yes 6 in 10 1/2 in 5.8600 in 5.8900 in 10.6100 in 10.6400 in
B937F044084 Yes 5 1/2 in 10 1/2 in 5.3600 in 5.3900 in 10.6100 in 10.6400 in
B937F040084 Yes 5 in 10 1/2 in 4.8600 in 4.8900 in 10.6100 in 10.6400 in
  Results 1 - 25 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform