Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C93700 (SAE 64) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93700 (SAE 64) Bronze Bars

Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 937
SAE 64 83-10-10
ASTM B271


Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 78.00 – 82.00%
Tin: 9.00 – 11.00%
Lead: 8.00 – 11.00%

Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 30,000 min.
Yield Strength, PSI: 12,000 min.
Elongation: 15% min.
Brinell Hardness (500 kg load): 60 typical
Machinability Rating 80
Minimum Operating Temperature -450°F
Maximum Operating Temperature 500°F

C93700 has higher tin and lead than C93200 and is used in bearings with higher speeds and loads. It has increased corrosion and oxidation resistance, with good anti-frictional properties, good load-carrying ability and excellent machinability. C93700 can be used in applications where lubrication may be low or interrupted.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 1 - 25 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

Sort by

I.D. Max

O.D. Min

O.D. Max

B937F152160 Yes 19 in 20 in 18.8600 in 18.8900 in 20.1100 in 20.1400 in
B937F148160 Yes 18 1/2 in 20 in 18.3600 in 18.3900 in 20.1100 in 20.1400 in
B937F148156 Yes 18 1/2 in 19 1/2 in 18.3600 in 18.3900 in 19.6100 in 19.6400 in
B937F144160 Yes 18 in 20 in 17.8600 in 17.8900 in 20.1100 in 20.1400 in
B937F144156 Yes 18 in 19 1/2 in 17.8600 in 17.8900 in 19.6100 in 19.6400 in
B937F144152 Yes 18 in 19 in 17.8600 in 17.8900 in 19.1100 in 19.1400 in
B937F140160 Yes 17 1/2 in 20 in 17.3600 in 17.3900 in 20.1100 in 20.1400 in
B937F140156 Yes 17 1/2 in 19 1/2 in 17.3600 in 17.3900 in 19.6100 in 19.6400 in
B937F140152 Yes 17 1/2 in 19 in 17.3600 in 17.3900 in 19.1100 in 19.1400 in
B937F140148 Yes 17 1/2 in 18 1/2 in 17.3600 in 17.3900 in 18.6100 in 18.6400 in
B937F136156 Yes 17 in 19 1/2 in 16.8600 in 16.8900 in 19.6100 in 19.6400 in
B937F136152 Yes 17 in 19 in 16.8600 in 16.8900 in 19.1100 in 19.1400 in
B937F136148 Yes 17 in 18 1/2 in 16.8600 in 16.8900 in 18.6100 in 18.6400 in
B937F136144 Yes 17 in 18 in 16.8600 in 16.8900 in 18.1100 in 18.1400 in
B937F132156 Yes 16 1/2 in 19 1/2 in 16.3600 in 16.3900 in 19.6100 in 19.6400 in
B937F132152 Yes 16 1/2 in 19 in 16.3600 in 16.3900 in 19.1100 in 19.1400 in
B937F132148 Yes 16 1/2 in 18 1/2 in 16.3600 in 16.3900 in 18.6100 in 18.6400 in
B937F132144 Yes 16 1/2 in 18 in 16.3600 in 16.3900 in 18.1100 in 18.1400 in
B937F132140 Yes 16 1/2 in 17 1/2 in 16.3600 in 16.3900 in 17.6100 in 17.6400 in
B937F128152 Yes 16 in 19 in 15.8600 in 15.8900 in 19.1100 in 19.1400 in
B937F128148 Yes 16 in 18 1/2 in 15.8600 in 15.8900 in 18.6100 in 18.6400 in
B937F128144 Yes 16 in 18 in 15.8600 in 15.8900 in 18.1100 in 18.1400 in
B937F128140 Yes 16 in 17 1/2 in 15.8600 in 15.8900 in 17.6100 in 17.6400 in
B937F128136 Yes 16 in 17 in 15.8600 in 15.8900 in 17.1100 in 17.1400 in
B937F124148 Yes 15 1/2 in 18 1/2 in 15.3600 in 15.3900 in 18.6100 in 18.6400 in
  Results 1 - 25 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform