Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C93800 (SAE 67) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93800 (SAE 67) Bronze Bars

 
Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 938
SAE 67 78-7-15
ASTM B271

Solid and cored bars are stocked in 13" increments and 105" lengths and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and alloys.

Typical Properties: (Not to be used for specification purposes.)
Copper 75.00 – 79.00%
Tin 6.30 – 7.50%
Lead 13.00 – 16.00%
Physical Properties: Centrifugal Cast
Tensile Strength PSI: 26,000 min.
Yield Strength PSI: 14,000 min.
Elongation: 12% min.
Brinell Hardness (500 kg load): 55 typical
Machinability Rating: 80
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93800 is similar to C93200 but the higher lead content improves the machinability and frictional properties. C93800 can be used in applications were lubrication may be interrupted without seizing. Bunting also produces other high-leaded alloys including C93400, C93600, C93700, C93900, C94000, C94100, C94300, C94400 and C94500.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 76 - 100 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

Sort by

I.D. Min

I.D. Max

O.D. Min

O.D. Max
B938F072100 Yes 9 in 12 1/2 in 8.8600 in 8.8900 in 12.6100 in 12.6400 in
B938F068100 Yes 8 1/2 in 12 1/2 in 8.3600 in 8.3900 in 12.6100 in 12.6400 in
B938F080100 Yes 10 in 12 1/2 in 9.8600 in 9.8900 in 12.6100 in 12.6400 in
B938F076100 Yes 9 1/2 in 12 1/2 in 9.3600 in 9.3900 in 12.6100 in 12.6400 in
B938F088100 Yes 11 in 12 1/2 in 10.8600 in 10.8900 in 12.6100 in 12.6400 in
B938F092100 Yes 11 1/2 in 12 1/2 in 11.3600 in 11.3900 in 12.6100 in 12.6400 in
B938F084100 Yes 10 1/2 in 12 1/2 in 10.3600 in 10.3900 in 12.6100 in 12.6400 in
B938F084104 Yes 10 1/2 in 13 in 10.3600 in 10.3900 in 13.1100 in 13.1400 in
B938F092104 Yes 11 1/2 in 13 in 11.3600 in 11.3900 in 13.1100 in 13.1400 in
B938F088104 Yes 11 in 13 in 10.8600 in 10.8900 in 13.1100 in 13.1400 in
B938F076104 Yes 9 1/2 in 13 in 9.3600 in 9.3900 in 13.1100 in 13.1400 in
B938F080104 Yes 10 in 13 in 9.8600 in 9.8900 in 13.1100 in 13.1400 in
B938F096104 Yes 12 in 13 in 11.8600 in 11.8900 in 13.1100 in 13.1400 in
B938F068104 Yes 8 1/2 in 13 in 8.3600 in 8.3900 in 13.1100 in 13.1400 in
B938F072104 Yes 9 in 13 in 8.8600 in 8.8900 in 13.1100 in 13.1400 in
B938F060104 Yes 7 1/2 in 13 in 7.3600 in 7.3900 in 13.1100 in 13.1400 in
B938F064104 Yes 8 in 13 in 7.8600 in 7.8900 in 13.1100 in 13.1400 in
B938F052104 Yes 6 1/2 in 13 in 6.3600 in 6.3900 in 13.1100 in 13.1400 in
B938F056104 Yes 7 in 13 in 6.8600 in 6.8900 in 13.1100 in 13.1400 in
B938F048104 Yes 6 in 13 in 5.8600 in 5.8900 in 13.1100 in 13.1400 in
B938F064108 Yes 8 in 13 1/2 in 7.8600 in 7.8900 in 13.6100 in 13.6400 in
B938F060108 Yes 7 1/2 in 13 1/2 in 7.3600 in 7.3900 in 13.6100 in 13.6400 in
B938F072108 Yes 9 in 13 1/2 in 8.8600 in 8.8900 in 13.6100 in 13.6400 in
B938F068108 Yes 8 1/2 in 13 1/2 in 8.3600 in 8.3900 in 13.6100 in 13.6400 in
B938F096108 Yes 12 in 13 1/2 in 11.8600 in 11.8900 in 13.6100 in 13.6400 in
  Results 76 - 100 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform