Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C93800 (SAE 67) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93800 (SAE 67) Bronze Bars

 
Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 938
SAE 67 78-7-15
ASTM B271

Solid and cored bars are stocked in 13" increments and 105" lengths and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and alloys.

Typical Properties: (Not to be used for specification purposes.)
Copper 75.00 – 79.00%
Tin 6.30 – 7.50%
Lead 13.00 – 16.00%
Physical Properties: Centrifugal Cast
Tensile Strength PSI: 26,000 min.
Yield Strength PSI: 14,000 min.
Elongation: 12% min.
Brinell Hardness (500 kg load): 55 typical
Machinability Rating: 80
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93800 is similar to C93200 but the higher lead content improves the machinability and frictional properties. C93800 can be used in applications were lubrication may be interrupted without seizing. Bunting also produces other high-leaded alloys including C93400, C93600, C93700, C93900, C94000, C94100, C94300, C94400 and C94500.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 26 - 50 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

Sort by

I.D. Min

I.D. Max

O.D. Min

O.D. Max
B938F096144 Yes 12 in 18 in 11.8600 in 11.8900 in 18.1100 in 18.1400 in
B938F112144 Yes 14 in 18 in 13.8600 in 13.8900 in 18.1100 in 18.1400 in
B938F080144 Yes 10 in 18 in 9.8600 in 9.8900 in 18.1100 in 18.1400 in
B938F132140 Yes 16 1/2 in 17 1/2 in 16.3600 in 16.3900 in 17.6100 in 17.6400 in
B938F128140 Yes 16 in 17 1/2 in 15.8600 in 15.8900 in 17.6100 in 17.6400 in
B938F120140 Yes 15 in 17 1/2 in 14.8600 in 14.8900 in 17.6100 in 17.6400 in
B938F124140 Yes 15 1/2 in 17 1/2 in 15.3600 in 15.3900 in 17.6100 in 17.6400 in
B938F124136 Yes 15 1/2 in 17 in 15.3600 in 15.3900 in 17.1100 in 17.1400 in
B938F128136 Yes 16 in 17 in 15.8600 in 15.8900 in 17.1100 in 17.1400 in
B938F116136 Yes 14 1/2 in 17 in 14.3600 in 14.3900 in 17.1100 in 17.1400 in
B938F120136 Yes 15 in 17 in 14.8600 in 14.8900 in 17.1100 in 17.1400 in
B938F108136 Yes 13 1/2 in 17 in 13.3600 in 13.3900 in 17.1100 in 17.1400 in
B938F112136 Yes 14 in 17 in 13.8600 in 13.8900 in 17.1100 in 17.1400 in
B938F112132 Yes 14 in 16 1/2 in 13.8600 in 13.8900 in 16.6100 in 16.6400 in
B938F108132 Yes 13 1/2 in 16 1/2 in 13.3600 in 13.3900 in 16.6100 in 16.6400 in
B938F120132 Yes 15 in 16 1/2 in 14.8600 in 14.8900 in 16.6100 in 16.6400 in
B938F116132 Yes 14 1/2 in 16 1/2 in 14.3600 in 14.3900 in 16.6100 in 16.6400 in
B938F124132 Yes 15 1/2 in 16 1/2 in 15.3600 in 15.3900 in 16.6100 in 16.6400 in
B938F116128 Yes 14 1/2 in 16 in 14.3600 in 14.3900 in 16.1100 in 16.1400 in
B938F120128 Yes 15 in 16 in 14.8600 in 14.8900 in 16.1100 in 16.1400 in
B938F108128 Yes 13 1/2 in 16 in 13.3600 in 13.3900 in 16.1100 in 16.1400 in
B938F112128 Yes 14 in 16 in 13.8600 in 13.8900 in 16.1100 in 16.1400 in
B938F096128 Yes 12 in 16 in 11.8600 in 11.8900 in 16.1100 in 16.1400 in
B938F100128 Yes 12 1/2 in 16 in 12.3600 in 12.3900 in 16.1100 in 16.1400 in
B938F104128 Yes 13 in 16 in 12.8600 in 12.8900 in 16.1100 in 16.1400 in
  Results 26 - 50 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform