Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C93800 (SAE 67) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93800 (SAE 67) Bronze Bars

 
Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 938
SAE 67 78-7-15
ASTM B271

Solid and cored bars are stocked in 13" increments and 105" lengths and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and alloys.

Typical Properties: (Not to be used for specification purposes.)
Copper 75.00 – 79.00%
Tin 6.30 – 7.50%
Lead 13.00 – 16.00%
Physical Properties: Centrifugal Cast
Tensile Strength PSI: 26,000 min.
Yield Strength PSI: 14,000 min.
Elongation: 12% min.
Brinell Hardness (500 kg load): 55 typical
Machinability Rating: 80
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93800 is similar to C93200 but the higher lead content improves the machinability and frictional properties. C93800 can be used in applications were lubrication may be interrupted without seizing. Bunting also produces other high-leaded alloys including C93400, C93600, C93700, C93900, C94000, C94100, C94300, C94400 and C94500.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 51 - 75 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max

Sort by
B938F068092 Yes 8 1/2 in 11 1/2 in 8.3600 in 8.3900 in 11.6100 in 11.6400 in
B938F072092 Yes 9 in 11 1/2 in 8.8600 in 8.8900 in 11.6100 in 11.6400 in
B938F076092 Yes 9 1/2 in 11 1/2 in 9.3600 in 9.3900 in 11.6100 in 11.6400 in
B938F080092 Yes 10 in 11 1/2 in 9.8600 in 9.8900 in 11.6100 in 11.6400 in
B938F084092 Yes 10 1/2 in 11 1/2 in 10.3600 in 10.3900 in 11.6100 in 11.6400 in
B938F040096 Yes 5 in 12 in 4.8600 in 4.8900 in 12.1100 in 12.1400 in
B938F044096 Yes 5 1/2 in 12 in 5.3600 in 5.3900 in 12.1100 in 12.1400 in
B938F048096 Yes 6 in 12 in 5.8600 in 5.8900 in 12.1100 in 12.1400 in
B938F052096 Yes 6 1/2 in 12 in 6.3600 in 6.3900 in 12.1100 in 12.1400 in
B938F056096 Yes 7 in 12 in 6.8600 in 6.8900 in 12.1100 in 12.1400 in
B938F060096 Yes 7 1/2 in 12 in 7.3600 in 7.3900 in 12.1100 in 12.1400 in
B938F064096 Yes 8 in 12 in 7.8600 in 7.8900 in 12.1100 in 12.1400 in
B938F068096 Yes 8 1/2 in 12 in 8.3600 in 8.3900 in 12.1100 in 12.1400 in
B938F072096 Yes 9 in 12 in 8.8600 in 8.8900 in 12.1100 in 12.1400 in
B938F076096 Yes 9 1/2 in 12 in 9.3600 in 9.3900 in 12.1100 in 12.1400 in
B938F080096 Yes 10 in 12 in 9.8600 in 9.8900 in 12.1100 in 12.1400 in
B938F084096 Yes 10 1/2 in 12 in 10.3600 in 10.3900 in 12.1100 in 12.1400 in
B938F088096 Yes 11 in 12 in 10.8600 in 10.8900 in 12.1100 in 12.1400 in
B938F040100 Yes 5 in 12 1/2 in 4.8600 in 4.8900 in 12.6100 in 12.6400 in
B938F044100 Yes 5 1/2 in 12 1/2 in 5.3600 in 5.3900 in 12.6100 in 12.6400 in
B938F048100 Yes 6 in 12 1/2 in 5.8600 in 5.8900 in 12.6100 in 12.6400 in
B938F052100 Yes 6 1/2 in 12 1/2 in 6.3600 in 6.3900 in 12.6100 in 12.6400 in
B938F056100 Yes 7 in 12 1/2 in 6.8600 in 6.8900 in 12.6100 in 12.6400 in
B938F060100 Yes 7 1/2 in 12 1/2 in 7.3600 in 7.3900 in 12.6100 in 12.6400 in
B938F064100 Yes 8 in 12 1/2 in 7.8600 in 7.8900 in 12.6100 in 12.6400 in
  Results 51 - 75 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform