Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C95500 Aluminum Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C95500 Aluminum Bronze Bars

Check up to five results to perform an action.

C95500 Aluminum Bronze is a non-lead “GREEN” Alloy
Nickel Aluminum Bronze
CDA 955
9D
ASTM B271


Aluminum bronze is a very hard, strong, abrasion resistant bronze whose physical properties remain good at elevated temperatures – compressive strength at 500°F is the same as that of tin bronzes at room temperature. Good applications include heavy earth moving equipment, roll neck bearings, and machine tool bearings.

Solid and cored bars are stocked in 13" increments and 144" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.
C95500 is available in either as cast condition or heat-treated.

Typical Properties: (Not to be used for specification purposes.)
Copper:78.00% min.
Aluminum: 10.00 – 11.50%
Iron: 3.00 – 5.00%
Nickel: 3.00 – 5.50%

Physical Properties: Centrifugal Cast
As Cast
Tensile Strength, PSI: 90,000 min.
Yield Strength, PSI: 40,000 min.
Elongation: 6% min.
Heat Treated
Tensile Strength, PSI: 110,000 min.
Yield Strength, PSI: 60,000 min.
Elongation: 5% min.
Brinell Hardness (3000 kg load; As Cast):195
Brinell Hardness (3000 kg load; Heat Treated): 230
Machinability Rating: 50
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 750°F intermittent to 1200°F

C95500 Aluminum bronze is used for low speed, and very high load bearing applications. The addition of nickel increases the physical properties and corrosion resistance compared to C95400. C95500 requires hardened steel shafts and constant lubrication of grease, graphite or molybdenum-disulfide.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 26 - 50 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max

B955F052080 Yes 6 1/2 in 10 in 6.3600 in 6.3900 in 10.1100 in 10.1400 in
B955F052084 Yes 6 1/2 in 10 1/2 in 6.3600 in 6.3900 in 10.6100 in 10.6400 in
B955F052088 Yes 6 1/2 in 11 in 6.3600 in 6.3900 in 11.1100 in 11.1400 in
B955F052092 Yes 6 1/2 in 11 1/2 in 6.3600 in 6.3900 in 11.6100 in 11.6400 in
B955F052096 Yes 6 1/2 in 12 in 6.3600 in 6.3900 in 12.1100 in 12.1400 in
B955F052100 Yes 6 1/2 in 12 1/2 in 6.3600 in 6.3900 in 12.6100 in 12.6400 in
B955F052104 Yes 6 1/2 in 13 in 6.3600 in 6.3900 in 13.1100 in 13.1400 in
B955F056068 Yes 7 in 8 1/2 in 6.8600 in 6.8900 in 8.6100 in 8.6400 in
B955F056072 Yes 7 in 9 in 6.8600 in 6.8900 in 9.1100 in 9.1400 in
B955F056076 Yes 7 in 9 1/2 in 6.8600 in 6.8900 in 9.6100 in 9.6400 in
B955F056080 Yes 7 in 10 in 6.8600 in 6.8900 in 10.1100 in 10.1400 in
B955F056084 Yes 7 in 10 1/2 in 6.8600 in 6.8900 in 10.6100 in 10.6400 in
B955F056088 Yes 7 in 11 in 6.8600 in 6.8900 in 11.1100 in 11.1400 in
B955F056092 Yes 7 in 11 1/2 in 6.8600 in 6.8900 in 11.6100 in 11.6400 in
B955F056096 Yes 7 in 12 in 6.8600 in 6.8900 in 12.1100 in 12.1400 in
B955F056100 Yes 7 in 12 1/2 in 6.8600 in 6.8900 in 12.6100 in 12.6400 in
B955F056104 Yes 7 in 13 in 6.8600 in 6.8900 in 13.1100 in 13.1400 in
B955F056112 Yes 7 in 14 in 6.8600 in 6.8900 in 14.1100 in 14.1400 in
B955F060068 Yes 7 1/2 in 8 1/2 in 7.3600 in 7.3900 in 8.6100 in 8.6400 in
B955F060076 Yes 7 1/2 in 9 1/2 in 7.3600 in 7.3900 in 9.6100 in 9.6400 in
B955F060080 Yes 7 1/2 in 10 in 7.3600 in 7.3900 in 10.1100 in 10.1400 in
B955F060084 Yes 7 1/2 in 10 1/2 in 7.3600 in 7.3900 in 10.6100 in 10.6400 in
B955F060088 Yes 7 1/2 in 11 in 7.3600 in 7.3900 in 11.1100 in 11.1400 in
B955F060092 Yes 7 1/2 in 11 1/2 in 7.3600 in 7.3900 in 11.6100 in 11.6400 in
B955F060096 Yes 7 1/2 in 12 in 7.3600 in 7.3900 in 12.1100 in 12.1400 in
  Results 26 - 50 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform