Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C86300 (SAE 430B) Manganese Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C86300 (SAE 430B) Manganese Bronze Bars

 
Check up to five results to perform an action.

C86300 Manganese Bronze is a non-lead “GREEN” Alloy
Manganese Bronze CDA 863
SAE 430B
ASTM B271

Solid and cored bars are stocked in 13" increments and 144" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 60.00 – 66.00%
Zinc: 22.00 – 28.00%
Iron: 2.00 – 4.00%
Aluminum: 5.00 – 7.50%
Manganese: 2.50 – 5.00%

Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 110,000 min.
Yield Strength, PSI: 62,000 min.
Elongation: 14% min.
Brinell Hardness (3000 kg load): 225 typical
Machinability Rating: 80
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 400°F

C86300 Aluminum bronze is used for low speed, and very high load bearing applications. C86300 requires hardened steel shafts and constant lubrication of grease, graphite or molybdenum-disulfide. Bunting also produces other Manganese Bronzes including C86200, C86400, C86500 and C86700.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 51 - 75 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Sort by

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max
B863F060100 Yes 7 1/2 in 12 1/2 in 7.3600 in 7.3900 in 12.6100 in 12.6400 in
B863F060104 Yes 7 1/2 in 13 in 7.3600 in 7.3900 in 13.1100 in 13.1400 in
B863F060108 Yes 7 1/2 in 13 1/2 in 7.3600 in 7.3900 in 13.6100 in 13.6400 in
B863F064072 Yes 8 in 9 in 7.8600 in 7.8900 in 9.1100 in 9.1400 in
B863F064076 Yes 8 in 9 1/2 in 7.8600 in 7.8900 in 9.6100 in 9.6400 in
B863F064080 Yes 8 in 10 in 7.8600 in 7.8900 in 10.1100 in 10.1400 in
B863F064084 Yes 8 in 10 1/2 in 7.8600 in 7.8900 in 10.6100 in 10.6400 in
B863F064088 Yes 8 in 11 in 7.8600 in 7.8900 in 11.1100 in 11.1400 in
B863F064092 Yes 8 in 11 1/2 in 7.8600 in 7.8900 in 11.6100 in 11.6400 in
B863F064096 Yes 8 in 12 in 7.8600 in 7.8900 in 12.1100 in 12.1400 in
B863F064100 Yes 8 in 12 1/2 in 7.8600 in 7.8900 in 12.6100 in 12.6400 in
B863F064104 Yes 8 in 13 in 7.8600 in 7.8900 in 13.1100 in 13.1400 in
B863F064108 Yes 8 in 13 1/2 in 7.8600 in 7.8900 in 13.6100 in 13.6400 in
B863F064112 Yes 8 in 14 in 7.8600 in 7.8900 in 14.1100 in 14.1400 in
B863F064128 Yes 8 in 16 in 7.8600 in 7.8900 in 16.1100 in 16.1400 in
B863F068076 Yes 8 1/2 in 9 1/2 in 8.3600 in 8.3900 in 9.6100 in 9.6400 in
B863F068080 Yes 8 1/2 in 10 in 8.3600 in 8.3900 in 10.1100 in 10.1400 in
B863F068084 Yes 8 1/2 in 10 1/2 in 8.3600 in 8.3900 in 10.6100 in 10.6400 in
B863F068088 Yes 8 1/2 in 11 in 8.3600 in 8.3900 in 11.1100 in 11.1400 in
B863F068092 Yes 8 1/2 in 11 1/2 in 8.3600 in 8.3900 in 11.6100 in 11.6400 in
B863F068096 Yes 8 1/2 in 12 in 8.3600 in 8.3900 in 12.1100 in 12.1400 in
B863F068100 Yes 8 1/2 in 12 1/2 in 8.3600 in 8.3900 in 12.6100 in 12.6400 in
B863F068104 Yes 8 1/2 in 13 in 8.3600 in 8.3900 in 13.1100 in 13.1400 in
B863F068108 Yes 8 1/2 in 13 1/2 in 8.3600 in 8.3900 in 13.6100 in 13.6400 in
B863F068112 Yes 8 1/2 in 14 in 8.3600 in 8.3900 in 14.1100 in 14.1400 in
  Results 51 - 75 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform