Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C86300 (SAE 430B) Manganese Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C86300 (SAE 430B) Manganese Bronze Bars

 
Check up to five results to perform an action.

C86300 Manganese Bronze is a non-lead “GREEN” Alloy
Manganese Bronze CDA 863
SAE 430B
ASTM B271

Solid and cored bars are stocked in 13" increments and 144" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 60.00 – 66.00%
Zinc: 22.00 – 28.00%
Iron: 2.00 – 4.00%
Aluminum: 5.00 – 7.50%
Manganese: 2.50 – 5.00%

Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 110,000 min.
Yield Strength, PSI: 62,000 min.
Elongation: 14% min.
Brinell Hardness (3000 kg load): 225 typical
Machinability Rating: 80
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 400°F

C86300 Aluminum bronze is used for low speed, and very high load bearing applications. C86300 requires hardened steel shafts and constant lubrication of grease, graphite or molybdenum-disulfide. Bunting also produces other Manganese Bronzes including C86200, C86400, C86500 and C86700.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 126 - 150 of 192 « 6 7 8 

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

Sort by

I.D. Min

I.D. Max

O.D. Min

O.D. Max
B863F084116 Yes 10 1/2 in 14 1/2 in 10.3600 in 10.3900 in 14.6100 in 14.6400 in
B863F084120 Yes 10 1/2 in 15 in 10.3600 in 10.3900 in 15.1100 in 15.1400 in
B863F092120 Yes 11 1/2 in 15 in 11.3600 in 11.3900 in 15.1100 in 15.1400 in
B863F088120 Yes 11 in 15 in 10.8600 in 10.8900 in 15.1100 in 15.1400 in
B863F108120 Yes 13 1/2 in 15 in 13.3600 in 13.3900 in 15.1100 in 15.1400 in
B863F112120 Yes 14 in 15 in 13.8600 in 13.8900 in 15.1100 in 15.1400 in
B863F100120 Yes 12 1/2 in 15 in 12.3600 in 12.3900 in 15.1100 in 15.1400 in
B863F104120 Yes 13 in 15 in 12.8600 in 12.8900 in 15.1100 in 15.1400 in
B863F096120 Yes 12 in 15 in 11.8600 in 11.8900 in 15.1100 in 15.1400 in
B863F096124 Yes 12 in 15 1/2 in 11.8600 in 11.8900 in 15.6100 in 15.6400 in
B863F104124 Yes 13 in 15 1/2 in 12.8600 in 12.8900 in 15.6100 in 15.6400 in
B863F100124 Yes 12 1/2 in 15 1/2 in 12.3600 in 12.3900 in 15.6100 in 15.6400 in
B863F112124 Yes 14 in 15 1/2 in 13.8600 in 13.8900 in 15.6100 in 15.6400 in
B863F108124 Yes 13 1/2 in 15 1/2 in 13.3600 in 13.3900 in 15.6100 in 15.6400 in
B863F116124 Yes 14 1/2 in 15 1/2 in 14.3600 in 14.3900 in 15.6100 in 15.6400 in
B863F116128 Yes 14 1/2 in 16 in 14.3600 in 14.3900 in 16.1100 in 16.1400 in
B863F120128 Yes 15 in 16 in 14.8600 in 14.8900 in 16.1100 in 16.1400 in
B863F108128 Yes 13 1/2 in 16 in 13.3600 in 13.3900 in 16.1100 in 16.1400 in
B863F112128 Yes 14 in 16 in 13.8600 in 13.8900 in 16.1100 in 16.1400 in
B863F100128 Yes 12 1/2 in 16 in 12.3600 in 12.3900 in 16.1100 in 16.1400 in
B863F104128 Yes 13 in 16 in 12.8600 in 12.8900 in 16.1100 in 16.1400 in
B863F096128 Yes 12 in 16 in 11.8600 in 11.8900 in 16.1100 in 16.1400 in
B863F080128 Yes 10 in 16 in 9.8600 in 9.8900 in 16.1100 in 16.1400 in
B863F064128 Yes 8 in 16 in 7.8600 in 7.8900 in 16.1100 in 16.1400 in
B863F112132 Yes 14 in 16 1/2 in 13.8600 in 13.8900 in 16.6100 in 16.6400 in
  Results 126 - 150 of 192 « 6 7 8 
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform