Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C86300 (SAE 430B) Manganese Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C86300 (SAE 430B) Manganese Bronze Bars

 
Check up to five results to perform an action.

C86300 Manganese Bronze is a non-lead “GREEN” Alloy
Manganese Bronze CDA 863
SAE 430B
ASTM B271

Solid and cored bars are stocked in 13" increments and 144" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 60.00 – 66.00%
Zinc: 22.00 – 28.00%
Iron: 2.00 – 4.00%
Aluminum: 5.00 – 7.50%
Manganese: 2.50 – 5.00%

Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 110,000 min.
Yield Strength, PSI: 62,000 min.
Elongation: 14% min.
Brinell Hardness (3000 kg load): 225 typical
Machinability Rating: 80
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 400°F

C86300 Aluminum bronze is used for low speed, and very high load bearing applications. C86300 requires hardened steel shafts and constant lubrication of grease, graphite or molybdenum-disulfide. Bunting also produces other Manganese Bronzes including C86200, C86400, C86500 and C86700.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 1 - 25 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Sort by

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max
B863F152160 Yes 19 in 20 in 18.8600 in 18.8900 in 20.1100 in 20.1400 in
B863F148156 Yes 18 1/2 in 19 1/2 in 18.3600 in 18.3900 in 19.6100 in 19.6400 in
B863F148160 Yes 18 1/2 in 20 in 18.3600 in 18.3900 in 20.1100 in 20.1400 in
B863F144152 Yes 18 in 19 in 17.8600 in 17.8900 in 19.1100 in 19.1400 in
B863F144156 Yes 18 in 19 1/2 in 17.8600 in 17.8900 in 19.6100 in 19.6400 in
B863F144160 Yes 18 in 20 in 17.8600 in 17.8900 in 20.1100 in 20.1400 in
B863F140148 Yes 17 1/2 in 18 1/2 in 17.3600 in 17.3900 in 18.6100 in 18.6400 in
B863F140152 Yes 17 1/2 in 19 in 17.3600 in 17.3900 in 19.1100 in 19.1400 in
B863F140156 Yes 17 1/2 in 19 1/2 in 17.3600 in 17.3900 in 19.6100 in 19.6400 in
B863F140160 Yes 17 1/2 in 20 in 17.3600 in 17.3900 in 20.1100 in 20.1400 in
B863F136144 Yes 17 in 18 in 16.8600 in 16.8900 in 18.1100 in 18.1400 in
B863F136148 Yes 17 in 18 1/2 in 16.8600 in 16.8900 in 18.6100 in 18.6400 in
B863F136152 Yes 17 in 19 in 16.8600 in 16.8900 in 19.1100 in 19.1400 in
B863F136156 Yes 17 in 19 1/2 in 16.8600 in 16.8900 in 19.6100 in 19.6400 in
B863F132140 Yes 16 1/2 in 17 1/2 in 16.3600 in 16.3900 in 17.6100 in 17.6400 in
B863F132144 Yes 16 1/2 in 18 in 16.3600 in 16.3900 in 18.1100 in 18.1400 in
B863F132148 Yes 16 1/2 in 18 1/2 in 16.3600 in 16.3900 in 18.6100 in 18.6400 in
B863F132152 Yes 16 1/2 in 19 in 16.3600 in 16.3900 in 19.1100 in 19.1400 in
B863F132156 Yes 16 1/2 in 19 1/2 in 16.3600 in 16.3900 in 19.6100 in 19.6400 in
B863F128136 Yes 16 in 17 in 15.8600 in 15.8900 in 17.1100 in 17.1400 in
B863F128140 Yes 16 in 17 1/2 in 15.8600 in 15.8900 in 17.6100 in 17.6400 in
B863F128144 Yes 16 in 18 in 15.8600 in 15.8900 in 18.1100 in 18.1400 in
B863F128148 Yes 16 in 18 1/2 in 15.8600 in 15.8900 in 18.6100 in 18.6400 in
B863F128152 Yes 16 in 19 in 15.8600 in 15.8900 in 19.1100 in 19.1400 in
B863F124132 Yes 15 1/2 in 16 1/2 in 15.3600 in 15.3900 in 16.6100 in 16.6400 in
  Results 1 - 25 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform