Southeast Non-Ferrous Alloys®
SENFA® > Continuous Cast Wearplate > C93200 (SAE 660) Bronze Wearplates > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93200 (SAE 660) Bronze Wearplates

 
Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 932
SAE 660
83-7-7-3
ASTM B505

Bunting continuous cast bronze bars of C93200 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects..

Wearplate is stocked in 13" increments or 105" lengths, and is available in other lengths and non-standard sizes.

Typical Properties: (Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%

Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 30,000 min.
Yield Strength, PSI: 14,000 min.
Elongation: 15% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 1 - 25 of 46 1 2 

Item #

Stock
Item?

Nominal Thickness

Nominal Width

Thickness Min.

Thickness Max.

Width Min.

Sort by

Width Max.
B932W024096 Yes 3 in 12 in 3.105 in 3.135 in 12.105 in 12.135 in
B932W016096 Yes 2 in 12 in 2.105 in 2.135 in 12.105 in 12.135 in
B932W012096 Yes 1 1/2 in 12 in 1.605 in 1.635 in 12.105 in 12.135 in
B932W008096 Yes 1 in 12 in 1.105 in 1.135 in 12.105 in 12.135 in
B932W006096 Yes 3/4 in 12 in 0.855 in 0.885 in 12.105 in 12.135 in
B932W004096 Yes 1/2 in 12 in 0.605 in 0.635 in 12.105 in 12.135 in
B932W003096 Yes 3/8 in 12 in 0.480 in 0.510 in 12.105 in 12.135 in
B932W002096 Yes 1/4 in 12 in 0.355 in 0.385 in 12.105 in 12.135 in
B932W008080 Yes 1 in 10 in 1.105 in 1.135 in 10.105 in 10.135 in
B932W020064 Yes 2 1/2 in 8 in 2.605 in 2.635 in 8.105 in 8.135 in
B932W016064 Yes 2 in 8 in 2.105 in 2.135 in 8.105 in 8.135 in
B932W012064 Yes 1 1/2 in 8 in 1.605 in 1.635 in 8.105 in 8.135 in
B932W010064 Yes 1 1/4 in 8 in 1.355 in 1.385 in 8.105 in 8.135 in
B932W008064 Yes 1 in 8 in 1.105 in 1.135 in 8.105 in 8.135 in
B932W006064 Yes 3/4 in 8 in 0.855 in 0.885 in 8.105 in 8.135 in
B932W004064 Yes 1/2 in 8 in 0.605 in 0.635 in 8.105 in 8.135 in
B932W003064 Yes 3/8 in 8 in 0.480 in 0.510 in 8.105 in 8.135 in
B932W002064 Yes 1/4 in 8 in 0.355 in 0.385 in 8.105 in 8.135 in
B932W024048 Yes 3 in 6 in 3.105 in 3.135 in 6.105 in 6.135 in
B932W010048 Yes 1 1/4 in 6 in 1.355 in 1.385 in 6.105 in 6.135 in
B932W008048 Yes 1 in 6 in 1.105 in 1.135 in 6.105 in 6.135 in
B932W006048 Yes 3/4 in 6 in 0.855 in 0.885 in 6.105 in 6.135 in
B932W004048 Yes 1/2 in 6 in 0.605 in 0.635 in 6.105 in 6.135 in
B932W020032 Yes 2 1/2 in 4 in 2.575 in 2.605 in 4.075 in 4.105 in
B932W016032 Yes 2 in 4 in 2.075 in 2.105 in 4.075 in 4.105 in
  Results 1 - 25 of 46 1 2 
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform