Nylon Sleeve (Plain) Bearings
(91) Bunting Nylon BearingsNYLON -Molded Nylon 101 sleeve (plain), flange, and thrust bearings provide an economical alternative where performance characteristics and the strength of metal bearings are not required. Bunting Bearings carries a full line of sleeve (plain), flange, and thrust styles to accommodate shafts up to 1" diameter.
Bunting Nylon Bearings inner diameters are measured after installation in a nominal housing.
Temperature range: -20°F/+250°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/Nylon-plain.jpg
Nylon Flanged Bearings
(83) Bunting Nylon BearingsNYLON -Molded Nylon 101 sleeve (plain), flange, and thrust bearings provide an economical alternative where performance characteristics and the strength of metal bearings are not required. Bunting Bearings carries a full line of sleeve (plain), flange, and thrust styles to accommodate shafts up to 1" diameter.
Bunting Nylon Bearings inner diameters are measured after installation in a nominal housing.
Temperature range: -20°F/+250°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/Nylon-Flanged-edited-1.jpg
Nylon Thrust Washers
(42) Bunting Nylon BearingsNYLON -Molded Nylon 101 sleeve (plain), flange, and thrust bearings provide an economical alternative where performance characteristics and the strength of metal bearings are not required. Bunting Bearings carries a full line of sleeve (plain), flange, and thrust styles to accommodate shafts up to 1" diameter.
Temperature range: -20°F/+250°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/Nylon-washer.jpg
PTFE BJ2 Sleeve (Plain) Bearings
(56) BJ2 bearings provide high levels of strength, rigidity, toughness, wear resistance and chemical resistance. They are engineered to satisfy a wide range of service requirements. (JLON 2100)Temperature range: -250°F/+550°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/IMG_2502.JPG
PTFE BJ4 Sleeve (Plain) Bearings
(56) BJ4 bearings operate at PV values up to approximately 30,000 dry. Ideal for rotary and linear bearings, BJ4 eliminates the need for lubrication in almost any environment. (JLON 4200)Temperature range: -250°F/+550°:F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/IMG_2504.JPG
PTFE BJ5 Sleeve (Plain) Bearings
(47) BJ5 bearings are polymer reinforced, BJ5 runs against soft mating surfaces such as mild steel, aluminum, and SAE 316 stainless steel without the mating surface wear typically found when other filled PTFE compounds are employed. (JLON 5500)Temperature range: -250°F/+550°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/IMG_2507.JPG
PTFE BJ7 Sleeve (Plain) Bearings
(12) BJ7 bearings are made from a specially formulated PTFE compound, designed for high load and wear resistance in food and drug contact applications. All of the components of BJ7 are FDA compliant and non-toxic. (JLON 7000)Temperature range: -250°F/+550°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/IMG_2515.jpg
PTFE BJ2 Flanged Bearings
(17) BJ2 bearings provide high levels of strength, rigidity, toughness, wear resistance and chemical resistance. They are engineered to satisfy a wide range of service requirements. (JLON 2100)Temperature range: -250°F/+550°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/BJ2-Flanged.jpg
PTFE BJ4 Flanged Bearings
(17) BJ4 bearings operate at PV values up to approximately 30,000 dry. Ideal for rotary and linear bearings, BJ4 eliminates the need for lubrication in almost any environment. (JLON 4200)Temperature range: -250°F/+550°:F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/IMG_2505.JPG
PTFE BJ5 Flanged Bearings
(15) BJ5 bearings are polymer reinforced, BJ5 runs against soft mating surfaces such as mild steel, aluminum, and SAE 316 stainless steel without the mating surface wear typically found when other filled PTFE compounds are employed. (JLON 5500)Temperature range: -250°F/+550°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/IMG_2510.JPG
PTFE BJ7 Flanged Bearings
(8) BJ7 bearings are made from a specially formulated PTFE compound, designed for high load and wear resistance in food and drug contact applications. All of the components of BJ7 are FDA compliant and non-toxic. (JLON 7000)Temperature range: -250°F/+550°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/IMG_2514.JPG
PTFE BJ2 Thrust Washers
(4) BJ2 thrust washers provide high levels of strength, rigidity, toughness, wear resistance and chemical resistance. They are engineered to satisfy a wide range of service requirements. (JLON 2100)Temperature range: -250°F/+550°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/IMG_2503.JPG
PTFE BJ4 Thrust Washers
(6) BJ4 thrust washers operate at PV values up to approximately 30,000 dry. Ideal for rotary and linear bearings, BJ4 eliminates the need for lubrication in almost any environment. (JLON 4200)Temperature range: -250°F/+550°:F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/BJ4-washers.jpg
PTFE BJ5 Thrust Washers
(6) BJ5 thrust washers are polymer reinforced, BJ5 runs against soft mating surfaces such as mild steel, aluminum, and SAE 316 stainless steel without the mating surface wear typically found when other filled PTFE compounds are employed. (JLON 5500)Temperature range: -250°F/+550°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/IMG_2511.JPG
PTFE BJ Liner Bearings
(10) BJ Liner bearings reduce material cost while being incredibly versatile. Their improved load capacity is achieved by capturing a minimum thickness of BJ tape inside a steel shell. (JLON 4200 Tape Liner)Temperature range: -400°F/+550°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/IMG_2529.jpg
PTFE BJ2 Solid Bars
(8) BJ2 bars provide high levels of strength, rigidity, toughness, wear resistance and chemical resistance. They are engineered to satisfy a wide range of service requirements. (JLON 2100)Temperature range: -250°F/+550°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/BJ2-Bar.jpg
PTFE BJ4 Solid Bars
(8) BJ4 bars operate at PV values up to approximately 30,000 dry. Ideal for rotary and linear bearings, BJ4 eliminates the need for lubrication in almost any environment. (JLON 4200)Temperature range: -250°F/+550°:F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/BJ4-Bar.jpg
PTFE BJ5 Solid Bars
(8) BJ5 bars are polymer reinforced, BJ5 runs against soft mating surfaces such as mild steel, aluminum, and SAE 316 stainless steel without the mating surface wear typically found when other filled PTFE compounds are employed. (JLON 5500)Temperature range: -250°F/+550°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/bj5-bar.jpg
PTFE BJ7 Solid Bars
(3) BJ7 bars are made from a specially formulated PTFE compound, designed for high load and wear resistance in food and drug contact applications. All of the components of BJ7 are FDA compliant and non-toxic. (JLON 7000)Temperature range: -250°F/+550°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/BJ7-Bar.jpg
PTFE Composite BNW Sleeve (Plain) Bearings
(177) Bunting Teflon® CompositeSleeve (Plain) Bearings
BNW-A self-lubricating, high load carrying BNW bearing is a sliding bearing which can exert excellent working property in non-lubricated condition. The bearing layer of BNW bearing consists of PTFE/high-tension synthetic fiber liner. The backing layer consists of fiberglass impregnated into epoxy resin for high temperature. BNW bearings are designed for the applications at slow speed and under heavy load. Bearing layer cannot be machined.
Temperature range: -212°F/+350°F
Consult Bunting for standard lengths available.
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/BNW-Sleeve-bearings.jpg
PTFE Composite BPT Sleeve (Plain) Bearings
(54)Bunting Teflon® Composite
Sleeve (Plain) Bearings
*Inside sleeve color may vary between green or black, both are one in the same
BPT bearings are designed for oscillatory and linear applications, offer long wear, and are shaft kind.
Temperature range: -212°F/+356°F
Consult Bunting for standard lengths available.
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
PTFE Composite .074" Thick Thrust Washers
(18) Bunting Teflon® CompositeThrust Washers
Non-metallic, self-lubricating Teflon® composite laminate washers designed to handle high thrust loads.
Bunting’s Teflon® composite thrust washers are available with Teflon® fabric bonded onto one side or both sides.
Temperature range: -65°F/+250°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/IMG_2523.JPG
PTFE Composite .078" Thick Thrust Washers
(18) Bunting Teflon® CompositeThrust Washers
Non-metallic, self-lubricating Teflon® composite laminate washers designed to handle high thrust loads.
Bunting’s Teflon® composite thrust washers are available with Teflon® fabric bonded onto one side or both sides.
Temperature range: -65°F/+250°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/IMG_2524.jpg
BU Dry Lubricant Bearings Inch Sizes
(66) Bunting “BU” Dry LubricantBearings
Bunting’s “BU” product is a composite material, consisting of bonded layers of a steel backing and a porous bronze matrix, impregnated and overlaid with PTFE bearing material. The steel backing provides mechanical strength and the bronze inter-layer, impregnated with PTFE, provides a strong mechanical bond for the lining. During normal operation, a thin film from the PTFE lining is transferred to the opposing surface and maintained there throughout the working life of the bearing.
Bunting’s “BU” is available, from stock, in the form of wrapped bearings in both inch and metric sizes. Thrust washers, strip material and non-standard bearing sizes are also available.
Temperature range: -328°F/+536°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/IMG_2531.jpg
BU Dry Lubricant Bearings METRIC Sizes
(73) Bunting “BU” Dry LubricantBearings
Bunting’s “BU” product is a composite material, consisting of bonded layers of a steel backing and a porous bronze matrix, impregnated and overlaid with PTFE bearing material. The steel backing provides mechanical strength and the bronze inter-layer, impregnated with PTFE, provides a strong mechanical bond for the lining. During normal operation, a thin film from the PTFE lining is transferred to the opposing surface and maintained there throughout the working life of the bearing.
Bunting’s “BU” is available, from stock, in the form of wrapped bearings in both inch and metric sizes. Thrust washers, strip material and non-standard bearing sizes are also available.
Temperature range: -328°F/+536°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/IMG_2531_blue.JPG
Vespel Sleeve (Plain) Bearings
(50)Bunting VESPEL®
Bearings
VESPEL® -Top of the line machined and Vespel® bearings provide capabilities of high speed, load, and temperature. Bunting Bearings offers a wide range of sizes as standard off-the-shelf, along with a full range of special, made to order sizes.
Vespel® bearings are made from polyimide resins to combine the best characteristics of plastics, metals, and ceramics. Vespel® resist wear and fight creep; properties that allow them to survive a broad range of conditions, particularly where elevated speeds and high loads present problems.
Precision machined sizes hold close tolerances.
Temperature range: -400°F/+550°F
Intermittently up to +900°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/IMG_2519.jpg
Vespel Flanged Bearings
(16) Bunting VESPEL®Bearings
VESPEL® -Top of the line machined and Vespel® bearings provide capabilities of high speed, load, and temperature. Bunting Bearings offers a wide range of sizes as standard off-the-shelf, along with a full range of special, made to order sizes.
Vespel® bearings are made from polyimide resins to combine the best characteristics of plastics, metals, and ceramics. Vespel® resist wear and fight creep; properties that allow them to survive a broad range of conditions, particularly where elevated speeds and high loads present problems.
Precision machined sizes hold close tolerances.
Temperature range: -400°F/+550°F
Intermittently up to +900°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/IMG_2517.jpg
Vespel Thrust Washers
(13) Bunting VESPEL®Bearings
VESPEL® -Top of the line machined and Vespel® bearings provide capabilities of high speed, load, and temperature. Bunting Bearings offers a wide range of sizes as standard off-the-shelf, along with a full range of special, made to order sizes.
Vespel® bearings are made from polyimide resins to combine the best characteristics of plastics, metals, and ceramics. Vespel® resist wear and fight creep; properties that allow them to survive a broad range of conditions, particularly where elevated speeds and high loads present problems.
Precision machined sizes hold close tolerances.
Temperature range: -400°F/+550°F
Intermittently up to +900°F
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/IMG_2521.JPG
Nylatron Sleeve (Plain) Bearings
(16) Nylatron is a modified nylon with molybdenum disulfide lubricant powder. Nylatron bearings give advantages over standard nylon such as superior wear resistance at an acceptable price. Nylatron is a cost effective material as it gives increased performance and productivity and it’s a self-lubricating nylon.Bunting stocks 16 of the most popular sizes used across a wide range of industries.
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. /Asset/BMDS-Sleeve-Bearing.JPG