Southeast Non-Ferrous Alloys®
 | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Quotes 0 Items
SENFA® > Continuous Cast Cored Bars > C89835 Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C89835 Bronze Bars

Check up to five results to perform an action.

C89835 is a “GREEN” Copper-Bismuth non-leaded alloy
(commonly used as a substitute to C93200 for non-lead applications)


Bunting continuous cast bronze bars of C89835 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.
Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: 85.00 – 89.00%
Tin: 6.00 – 7.50%
Lead: 0.05% max.
Zinc: 2.00 – 4.00%
Nickel: 1.00% max.
Bismuth: 1.7 – 2.7%

Physical Properties: Continuous Cast
Tensile Strength, PSI:30,000 min.
Yield Strength, PSI:14,000 min.
Elongation:12% min.
Machinability Rating:70.
Minimum Operating Temperature:-450°F.
Maximum Operating Temperature:500°F.

C89835 is used as a no-lead replacement for C93200 material where lead-free material is required. Properties are similar to the C93200 material however; bismuth does not lubricate as well as lead so a constant supply of lubrication is recommended when using this material. Bunting also produces lead-free materials that replace C83600, C84400, C93700, C93800 and C94500 with bismuth alloys.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 1 - 17 of 17 1 

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max

BB04C004008 No 1/2 in 1 in 0.4360 in 0.4800 in 1.0310 in 1.0410 in
BB04C006010 No 3/4 in 1 1/4 in 0.6860 in 0.7300 in 1.2810 in 1.2910 in
BB04C008012 No 1 in 1 1/2 in 0.9360 in 0.9800 in 1.5310 in 1.5410 in
BB04C008016 Yes 1 in 2 in 0.9360 in 0.9800 in 2.0340 in 2.0440 in
BB04C012016 No 1 1/2 in 2 in 1.4360 in 1.4800 in 2.0340 in 2.0440 in
BB04C012020 No 1 1/2 in 2 1/2 in 1.4360 in 1.4800 in 2.5340 in 2.5440 in
BB04C016020 No 2 in 2 1/2 in 1.9360 in 1.9800 in 2.5340 in 2.5440 in
BB04C016024 Yes 2 in 3 in 1.9360 in 1.9800 in 3.0340 in 3.0440 in
BB04C020024 No 2 1/2 in 3 in 2.4360 in 2.4800 in 3.0340 in 3.0440 in
BB04C020028 No 2 1/2 in 3 1/2 in 2.4360 in 2.4800 in 3.5340 in 3.5440 in
BB04C024028 No 3 in 3 1/2 in 2.9360 in 2.9800 in 3.5340 in 3.5440 in
BB04C024032 No 3 in 4 in 2.8910 in 2.9530 in 4.0550 in 4.0710 in
BB04C028032 No 3 1/2 in 4 in 3.3910 in 3.4530 in 4.0550 in 4.0710 in
BB04C028036 No 3 1/2 in 4 1/2 in 3.3910 in 3.4530 in 4.5550 in 4.5710 in
BB04C032036 No 4 in 4 1/2 in 3.8910 in 3.9530 in 4.5550 in 4.5710 in
BB04C032040 Yes 4 in 5 in 3.8910 in 3.9530 in 5.0550 in 5.0710 in
BB04C036044 No 4 1/2 in 5 1/2 in 4.3420 in 4.4380 in 5.5780 in 5.6100 in
  Results 1 - 17 of 17 1 
Privacy Policy|Sitemap|Catalog IndexCopyright © 2019 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform