Southeast Non-Ferrous Alloys®
SENFA® > Continuous Cast Cored Bars > C93200 (SAE 660) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93200 (SAE 660) Bronze Bars

 
Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 932
SAE 660
83-7-7-3
ASTM B505

Bunting continuous cast bronze bars of C93200 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%

Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 10% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 226 - 250 of 289 « 6 7 8 9 10 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max
B932C044052 Yes 5 1/2 in 6 1/2 in 5.3420 in 5.4380 in 6.5780 in 6.6100 in
B932C044056 Yes 5 1/2 in 7 in 5.3420 in 5.4380 in 7.0780 in 7.1100 in
B932C044060 Yes 5 1/2 in 7 1/2 in 5.3420 in 5.4380 in 7.5780 in 7.6100 in
B932C044064 Yes 5 1/2 in 8 in 5.3420 in 5.4380 in 8.0780 in 8.1100 in
B932C046054 Yes 5 3/4 in 6 3/4 in 5.5920 in 5.6880 in 6.8280 in 6.8600 in
B932C046060 No 5 3/4 in 7 1/2 in 5.5920 in 5.6880 in 7.5780 in 7.6100 in
B932C046064 No 5 3/4 in 8 in 5.5920 in 5.6880 in 8.0780 in 8.1100 in
B932C048052 No 6 in 6 1/2 in 5.8420 in 5.9380 in 6.5780 in 6.6100 in
B932C048054 Yes 6 in 6 3/4 in 5.8420 in 5.9380 in 6.8280 in 6.8600 in
B932C048056 Yes 6 in 7 in 5.8420 in 5.9380 in 7.0780 in 7.1100 in
B932C048060 Yes 6 in 7 1/2 in 5.8420 in 5.9380 in 7.5780 in 7.6100 in
B932C048064 Yes 6 in 8 in 5.8420 in 5.9380 in 8.0780 in 8.1100 in
B932C048068 Yes 6 in 8 1/2 in 5.8420 in 5.9380 in 8.5780 in 8.6100 in
B932C048072 Yes 6 in 9 in 5.8420 in 5.9380 in 9.0780 in 9.1100 in
B932C048080 Yes 6 in 10 in 5.8180 in 5.9380 in 10.0780 in 10.1340 in
B932C048088 No 6 in 11 in 5.8180 in 5.9380 in 11.0780 in 11.1340 in
B932C048096 Yes 6 in 12 in 5.8180 in 5.9380 in 12.0780 in 12.1340 in
B932C052060 Yes 6 1/2 in 7 1/2 in 6.3420 in 6.4380 in 7.5780 in 7.6100 in
B932C052064 Yes 6 1/2 in 8 in 6.3420 in 6.4380 in 8.0780 in 8.1100 in
B932C052068 Yes 6 1/2 in 8 1/2 in 6.3420 in 6.4380 in 8.5780 in 8.6100 in
B932C052072 No 6 1/2 in 9 in 6.3420 in 6.4380 in 9.0780 in 9.1100 in
B932C052076 No 6 1/2 in 9 1/2 in 6.3180 in 6.4380 in 9.5780 in 9.6340 in
B932C056064 Yes 7 in 8 in 6.8420 in 6.9380 in 8.0780 in 8.1100 in
B932C056068 Yes 7 in 8 1/2 in 6.8420 in 6.9380 in 8.5780 in 8.6100 in
B932C056072 Yes 7 in 9 in 6.8420 in 6.9380 in 9.0780 in 9.1100 in
  Results 226 - 250 of 289 « 6 7 8 9 10 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform