Southeast Non-Ferrous Alloys®
SENFA® > Continuous Cast Cored Bars > C93200 (SAE 660) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93200 (SAE 660) Bronze Bars

 
Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 932
SAE 660
83-7-7-3
ASTM B505

Bunting continuous cast bronze bars of C93200 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%

Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 10% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 251 - 275 of 289 « 11 12 

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max
B932C056076 Yes 7 in 9 1/2 in 6.8180 in 6.9380 in 9.5780 in 9.6340 in
B932C056080 Yes 7 in 10 in 6.8180 in 6.9380 in 10.0780 in 10.1340 in
B932C056088 Yes 7 in 11 in 6.8180 in 6.9380 in 11.0780 in 11.1340 in
B932C056096 No 7 in 12 in 6.8180 in 6.9380 in 12.0780 in 12.1340 in
B932C060068 Yes 7 1/2 in 8 1/2 in 7.3420 in 7.4380 in 8.5780 in 8.6100 in
B932C060076 Yes 7 1/2 in 9 1/2 in 7.3180 in 7.4380 in 9.5780 in 9.6340 in
B932C060084 No 7 1/2 in 10 1/2 in 7.3180 in 7.4380 in 10.5780 in 10.6340 in
B932C064072 Yes 8 in 9 in 7.8420 in 7.9380 in 9.0780 in 9.1100 in
B932C064076 Yes 8 in 9 1/2 in 7.8180 in 7.9380 in 9.5780 in 9.6340 in
B932C064080 Yes 8 in 10 in 7.8180 in 7.9380 in 10.0780 in 10.1340 in
B932C064084 Yes 8 in 10 1/2 in 7.8180 in 7.9380 in 10.5780 in 10.6340 in
B932C064088 No 8 in 11 in 7.8180 in 7.9380 in 11.0780 in 11.1340 in
B932C064096 Yes 8 in 12 in 7.8180 in 7.9380 in 12.0780 in 12.1340 in
B932C068076 Yes 8 1/2 in 9 1/2 in 8.3180 in 8.4380 in 9.5780 in 9.6340 in
B932C068084 No 8 1/2 in 10 1/2 in 8.3180 in 8.4380 in 10.5780 in 10.6340 in
B932C068092 Yes 8 1/2 in 11 1/2 in 8.3180 in 8.4380 in 11.5780 in 11.6340 in
B932C072080 Yes 9 in 10 in 8.8180 in 8.9380 in 10.0780 in 10.1340 in
B932C072084 Yes 9 in 10 1/2 in 8.8180 in 8.9380 in 10.5780 in 10.6340 in
B932C072088 Yes 9 in 11 in 8.8180 in 8.9380 in 11.0780 in 11.1340 in
B932C072092 No 9 in 11 1/2 in 8.8180 in 8.9380 in 11.5780 in 11.6340 in
B932C072096 Yes 9 in 12 in 8.8180 in 8.9380 in 12.0780 in 12.1340 in
B932C076084 No 9 1/2 in 10 1/2 in 9.3180 in 9.4380 in 10.5780 in 10.6340 in
B932C076088 No 9 1/2 in 11 in 9.3180 in 9.4380 in 11.0780 in 11.1340 in
B932C076092 Yes 9 1/2 in 11 1/2 in 9.3180 in 9.4380 in 11.5780 in 11.6340 in
B932C076100 Yes 9 1/2 in 12 1/2 in 9.3180 in 9.4380 in 12.5780 in 12.6340 in
  Results 251 - 275 of 289 « 11 12 
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform