Southeast Non-Ferrous Alloys®
SENFA® > Continuous Cast Cored Bars > C93200 (SAE 660) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93200 (SAE 660) Bronze Bars

 
Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 932
SAE 660
83-7-7-3
ASTM B505

Bunting continuous cast bronze bars of C93200 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%

Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 10% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 151 - 175 of 289 « 6 7 8 9 10 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max
B932C022028 Yes 2 3/4 in 3 1/2 in 2.6860 in 2.7300 in 3.5340 in 3.5440 in
B932C022030 Yes 2 3/4 in 3 3/4 in 2.6860 in 2.7300 in 3.7840 in 3.7940 in
B932C022032 Yes 2 3/4 in 4 in 2.6410 in 2.7030 in 4.0550 in 4.0710 in
B932C022034 Yes 2 3/4 in 4 1/4 in 2.6410 in 2.7030 in 4.3050 in 4.3210 in
B932C022036 Yes 2 3/4 in 4 1/2 in 2.6410 in 2.7030 in 4.5550 in 4.5710 in
B932C022038 No 2 3/4 in 4 3/4 in 2.6410 in 2.7030 in 4.8050 in 4.8210 in
B932C023032 No 2 7/8 in 4 in 2.7660 in 2.8280 in 4.0550 in 4.0710 in
B932C024028 Yes 3 in 3 1/2 in 2.9360 in 2.9800 in 3.5340 in 3.5440 in
B932C024029 No 3 in 3 5/8 in 2.9360 in 2.9800 in 3.6590 in 3.6690 in
B932C024030 Yes 3 in 3 3/4 in 2.9360 in 2.9800 in 3.7840 in 3.7940 in
B932C024032 Yes 3 in 4 in 2.8910 in 2.9530 in 4.0550 in 4.0710 in
B932C024034 Yes 3 in 4 1/4 in 2.8910 in 2.9530 in 4.3050 in 4.3210 in
B932C024036 Yes 3 in 4 1/2 in 2.8910 in 2.9530 in 4.5550 in 4.5710 in
B932C024038 Yes 3 in 4 3/4 in 2.8910 in 2.9530 in 4.8050 in 4.8210 in
B932C024040 Yes 3 in 5 in 2.8910 in 2.9530 in 5.0550 in 5.0710 in
B932C024044 Yes 3 in 5 1/2 in 2.8420 in 2.9380 in 5.5780 in 5.6100 in
B932C024048 Yes 3 in 6 in 2.8420 in 2.9380 in 6.0780 in 6.1100 in
B932C024052 Yes 3 in 6 1/2 in 2.8420 in 2.9380 in 6.5780 in 6.6100 in
B932C024056 Yes 3 in 7 in 2.8420 in 2.9380 in 7.0780 in 7.1100 in
B932C024064 Yes 3 in 8 in 2.8420 in 2.9380 in 8.0780 in 8.1100 in
B932C026030 No 3 1/4 in 3 3/4 in 3.1860 in 3.2300 in 3.7840 in 3.7940 in
B932C026032 Yes 3 1/4 in 4 in 3.1410 in 3.2030 in 4.0550 in 4.0710 in
B932C026034 Yes 3 1/4 in 4 1/4 in 3.1410 in 3.2030 in 4.3050 in 4.3210 in
B932C026036 No 3 1/4 in 4 1/2 in 3.1410 in 3.2030 in 4.5550 in 4.5710 in
B932C026038 No 3 1/4 in 4 3/4 in 3.1410 in 3.2030 in 4.8050 in 4.8210 in
  Results 151 - 175 of 289 « 6 7 8 9 10 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform