Southeast Non-Ferrous Alloys®
SENFA® > Continuous Cast Cored Bars > C93200 (SAE 660) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93200 (SAE 660) Bronze Bars

 
Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 932
SAE 660
83-7-7-3
ASTM B505

Bunting continuous cast bronze bars of C93200 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%

Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 10% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 201 - 225 of 289 « 6 7 8 9 10 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

Sort by

O.D. Max
B932C034048 No 4 1/4 in 6 in 4.0920 in 4.1880 in 6.0780 in 6.1100 in
B932C036048 Yes 4 1/2 in 6 in 4.3420 in 4.4380 in 6.0780 in 6.1100 in
B932C038048 No 4 3/4 in 6 in 4.5920 in 4.6880 in 6.0780 in 6.1100 in
B932C040048 Yes 5 in 6 in 4.8420 in 4.9380 in 6.0780 in 6.1100 in
B932C044048 No 5 1/2 in 6 in 5.3420 in 5.4380 in 6.0780 in 6.1100 in
B932C024052 Yes 3 in 6 1/2 in 2.8420 in 2.9380 in 6.5780 in 6.6100 in
B932C028052 Yes 3 1/2 in 6 1/2 in 3.3420 in 3.4380 in 6.5780 in 6.6100 in
B932C032052 Yes 4 in 6 1/2 in 3.8420 in 3.9380 in 6.5780 in 6.6100 in
B932C034052 No 4 1/4 in 6 1/2 in 4.0920 in 4.1880 in 6.5780 in 6.6100 in
B932C036052 Yes 4 1/2 in 6 1/2 in 4.3420 in 4.4380 in 6.5780 in 6.6100 in
B932C038052 No 4 3/4 in 6 1/2 in 4.5920 in 4.6880 in 6.5780 in 6.6100 in
B932C040052 Yes 5 in 6 1/2 in 4.8420 in 4.9380 in 6.5780 in 6.6100 in
B932C044052 Yes 5 1/2 in 6 1/2 in 5.3420 in 5.4380 in 6.5780 in 6.6100 in
B932C048052 No 6 in 6 1/2 in 5.8420 in 5.9380 in 6.5780 in 6.6100 in
B932C046054 Yes 5 3/4 in 6 3/4 in 5.5920 in 5.6880 in 6.8280 in 6.8600 in
B932C048054 Yes 6 in 6 3/4 in 5.8420 in 5.9380 in 6.8280 in 6.8600 in
B932C024056 Yes 3 in 7 in 2.8420 in 2.9380 in 7.0780 in 7.1100 in
B932C032056 Yes 4 in 7 in 3.8420 in 3.9380 in 7.0780 in 7.1100 in
B932C036056 No 4 1/2 in 7 in 4.3420 in 4.4380 in 7.0780 in 7.1100 in
B932C040056 Yes 5 in 7 in 4.8420 in 4.9380 in 7.0780 in 7.1100 in
B932C042056 No 5 1/4 in 7 in 5.0920 in 5.1880 in 7.0780 in 7.1100 in
B932C044056 Yes 5 1/2 in 7 in 5.3420 in 5.4380 in 7.0780 in 7.1100 in
B932C048056 Yes 6 in 7 in 5.8420 in 5.9380 in 7.0780 in 7.1100 in
B932C032060 Yes 4 in 7 1/2 in 3.8420 in 3.9380 in 7.5780 in 7.6100 in
B932C040060 Yes 5 in 7 1/2 in 4.8420 in 4.9380 in 7.5780 in 7.6100 in
  Results 201 - 225 of 289 « 6 7 8 9 10 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform