Southeast Non-Ferrous Alloys®
SENFA® > Continuous Cast Cored Bars > C93200 (SAE 660) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93200 (SAE 660) Bronze Bars

 
Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 932
SAE 660
83-7-7-3
ASTM B505

Bunting continuous cast bronze bars of C93200 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%

Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 10% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 51 - 75 of 289  1 2 3 4 5 »  

Item #

Stock
Item?

Sort by

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max
B932C034048 No 4 1/4 in 6 in 4.0920 in 4.1880 in 6.0780 in 6.1100 in
B932C034052 No 4 1/4 in 6 1/2 in 4.0920 in 4.1880 in 6.5780 in 6.6100 in
B932C036056 No 4 1/2 in 7 in 4.3420 in 4.4380 in 7.0780 in 7.1100 in
B932C038048 No 4 3/4 in 6 in 4.5920 in 4.6880 in 6.0780 in 6.1100 in
B932C038052 No 4 3/4 in 6 1/2 in 4.5920 in 4.6880 in 6.5780 in 6.6100 in
B932C042056 No 5 1/4 in 7 in 5.0920 in 5.1880 in 7.0780 in 7.1100 in
B932C044048 No 5 1/2 in 6 in 5.3420 in 5.4380 in 6.0780 in 6.1100 in
B932C046060 No 5 3/4 in 7 1/2 in 5.5920 in 5.6880 in 7.5780 in 7.6100 in
B932C046064 No 5 3/4 in 8 in 5.5920 in 5.6880 in 8.0780 in 8.1100 in
B932C048052 No 6 in 6 1/2 in 5.8420 in 5.9380 in 6.5780 in 6.6100 in
B932C048088 No 6 in 11 in 5.8180 in 5.9380 in 11.0780 in 11.1340 in
B932C052072 No 6 1/2 in 9 in 6.3420 in 6.4380 in 9.0780 in 9.1100 in
B932C052076 No 6 1/2 in 9 1/2 in 6.3180 in 6.4380 in 9.5780 in 9.6340 in
B932C056096 No 7 in 12 in 6.8180 in 6.9380 in 12.0780 in 12.1340 in
B932C060084 No 7 1/2 in 10 1/2 in 7.3180 in 7.4380 in 10.5780 in 10.6340 in
B932C064088 No 8 in 11 in 7.8180 in 7.9380 in 11.0780 in 11.1340 in
B932C068084 No 8 1/2 in 10 1/2 in 8.3180 in 8.4380 in 10.5780 in 10.6340 in
B932C072092 No 9 in 11 1/2 in 8.8180 in 8.9380 in 11.5780 in 11.6340 in
B932C076084 No 9 1/2 in 10 1/2 in 9.3180 in 9.4380 in 10.5780 in 10.6340 in
B932C076088 No 9 1/2 in 11 in 9.3180 in 9.4380 in 11.0780 in 11.1340 in
B932C084092 No 10 1/2 in 11 1/2 in 10.3180 in 10.4380 in 11.5780 in 11.6340 in
B932C084096 No 10 1/2 in 12 in 10.3180 in 10.4380 in 12.0780 in 12.1340 in
B932C084100 No 10 1/2 in 12 1/2 in 10.3180 in 10.4380 in 12.5780 in 12.6340 in
B932C084104 No 10 1/2 in 13 in 10.3180 in 10.4380 in 13.0780 in 13.1340 in
B932C088096 No 11 in 12 in 10.8180 in 10.9380 in 12.0780 in 12.1340 in
  Results 51 - 75 of 289  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform