Southeast Non-Ferrous Alloys®
SENFA® > Continuous Cast Cored Bars > C93200 (SAE 660) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93200 (SAE 660) Bronze Bars

 
Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 932
SAE 660
83-7-7-3
ASTM B505

Bunting continuous cast bronze bars of C93200 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%

Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 10% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 101 - 125 of 289  1 2 3 4 5 »  

Item #

Stock
Item?

Sort by

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max
B932C008018 Yes 1 in 2 1/4 in 0.9360 in 0.9800 in 2.2840 in 2.2940 in
B932C008020 Yes 1 in 2 1/2 in 0.9360 in 0.9800 in 2.5340 in 2.5440 in
B932C008022 Yes 1 in 2 3/4 in 0.9360 in 0.9800 in 2.7840 in 2.7940 in
B932C008024 Yes 1 in 3 in 0.9360 in 0.9800 in 3.0340 in 3.0440 in
B932C008028 Yes 1 in 3 1/2 in 0.9360 in 0.9800 in 3.5340 in 3.5440 in
B932C008032 Yes 1 in 4 in 0.8910 in 0.9530 in 4.0550 in 4.0710 in
B932C009011 Yes 1 1/8 in 1 3/8 in 1.0610 in 1.1050 in 1.4060 in 1.4160 in
B932C009012 Yes 1 1/8 in 1 1/2 in 1.0610 in 1.1050 in 1.5310 in 1.5410 in
B932C009016 Yes 1 1/8 in 2 in 1.0610 in 1.1050 in 2.0340 in 2.0440 in
B932C010012 Yes 1 1/4 in 1 1/2 in 1.1860 in 1.2300 in 1.5310 in 1.5410 in
B932C010013 Yes 1 1/4 in 1 5/8 in 1.1860 in 1.2300 in 1.6560 in 1.6660 in
B932C010014 Yes 1 1/4 in 1 3/4 in 1.1860 in 1.2300 in 1.7810 in 1.7910 in
B932C010015 Yes 1 1/4 in 1 7/8 in 1.1860 in 1.2300 in 1.9060 in 1.9160 in
B932C010016 Yes 1 1/4 in 2 in 1.1860 in 1.2300 in 2.0340 in 2.0440 in
B932C010018 Yes 1 1/4 in 2 1/4 in 1.1860 in 1.2300 in 2.2840 in 2.2940 in
B932C010020 Yes 1 1/4 in 2 1/2 in 1.1860 in 1.2300 in 2.5340 in 2.5440 in
B932C010022 Yes 1 1/4 in 2 3/4 in 1.1860 in 1.2300 in 2.7840 in 2.7940 in
B932C010024 Yes 1 1/4 in 3 in 1.1860 in 1.2300 in 3.0340 in 3.0440 in
B932C010026 Yes 1 1/4 in 3 1/4 in 1.1860 in 1.2300 in 3.2840 in 3.2940 in
B932C010028 Yes 1 1/4 in 3 1/2 in 1.1860 in 1.2300 in 3.5340 in 3.5440 in
B932C011013 Yes 1 3/8 in 1 5/8 in 1.3110 in 1.3550 in 1.6560 in 1.6660 in
B932C011014 Yes 1 3/8 in 1 3/4 in 1.3110 in 1.3550 in 1.7810 in 1.7910 in
B932C011016 Yes 1 3/8 in 2 in 1.3110 in 1.3550 in 2.0340 in 2.0440 in
B932C011017 Yes 1 3/8 in 2 1/8 in 1.3110 in 1.3550 in 2.1590 in 2.1690 in
B932C011020 Yes 1 3/8 in 2 1/2 in 1.3110 in 1.3550 in 2.5340 in 2.5440 in
  Results 101 - 125 of 289  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform