Southeast Non-Ferrous Alloys®
SENFA® > Continuous Cast Cored Bars > C93200 (SAE 660) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93200 (SAE 660) Bronze Bars

 
Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 932
SAE 660
83-7-7-3
ASTM B505

Bunting continuous cast bronze bars of C93200 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%

Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 10% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 1 - 25 of 289  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

Sort by

I.D. Max

O.D. Min

O.D. Max
B932C104120 Yes 13 in 15 in 12.8180 in 12.9380 in 15.0780 in 15.1340 in
B932C096120 Yes 12 in 15 in 11.8180 in 11.9380 in 15.0780 in 15.1340 in
B932C096112 Yes 12 in 14 in 11.8180 in 11.9380 in 14.0780 in 14.1340 in
B932C092104 Yes 11 1/2 in 13 in 11.3180 in 11.4380 in 13.0780 in 13.1340 in
B932C088112 No 11 in 14 in 10.8180 in 10.9380 in 14.0780 in 14.1340 in
B932C088096 No 11 in 12 in 10.8180 in 10.9380 in 12.0780 in 12.1340 in
B932C084104 No 10 1/2 in 13 in 10.3180 in 10.4380 in 13.0780 in 13.1340 in
B932C084100 No 10 1/2 in 12 1/2 in 10.3180 in 10.4380 in 12.5780 in 12.6340 in
B932C084096 No 10 1/2 in 12 in 10.3180 in 10.4380 in 12.0780 in 12.1340 in
B932C084092 No 10 1/2 in 11 1/2 in 10.3180 in 10.4380 in 11.5780 in 11.6340 in
B932C080112 Yes 10 in 14 in 9.8180 in 9.9380 in 14.0780 in 14.1340 in
B932C080096 Yes 10 in 12 in 9.8180 in 9.9380 in 12.0780 in 12.1340 in
B932C080092 Yes 10 in 11 1/2 in 9.8180 in 9.9380 in 11.5780 in 11.6340 in
B932C080088 Yes 10 in 11 in 9.8180 in 9.9380 in 11.0780 in 11.1340 in
B932C076100 Yes 9 1/2 in 12 1/2 in 9.3180 in 9.4380 in 12.5780 in 12.6340 in
B932C076092 Yes 9 1/2 in 11 1/2 in 9.3180 in 9.4380 in 11.5780 in 11.6340 in
B932C076088 No 9 1/2 in 11 in 9.3180 in 9.4380 in 11.0780 in 11.1340 in
B932C076084 No 9 1/2 in 10 1/2 in 9.3180 in 9.4380 in 10.5780 in 10.6340 in
B932C072096 Yes 9 in 12 in 8.8180 in 8.9380 in 12.0780 in 12.1340 in
B932C072092 No 9 in 11 1/2 in 8.8180 in 8.9380 in 11.5780 in 11.6340 in
B932C072088 Yes 9 in 11 in 8.8180 in 8.9380 in 11.0780 in 11.1340 in
B932C072084 Yes 9 in 10 1/2 in 8.8180 in 8.9380 in 10.5780 in 10.6340 in
B932C072080 Yes 9 in 10 in 8.8180 in 8.9380 in 10.0780 in 10.1340 in
B932C068092 Yes 8 1/2 in 11 1/2 in 8.3180 in 8.4380 in 11.5780 in 11.6340 in
B932C068084 No 8 1/2 in 10 1/2 in 8.3180 in 8.4380 in 10.5780 in 10.6340 in
  Results 1 - 25 of 289  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform