Southeast Non-Ferrous Alloys®
SENFA® > Continuous Cast Cored Bars > C93200 (SAE 660) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93200 (SAE 660) Bronze Bars

 
Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 932
SAE 660
83-7-7-3
ASTM B505

Bunting continuous cast bronze bars of C93200 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%

Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 10% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 101 - 125 of 289  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

Sort by

O.D. Max
B932C014024 Yes 1 3/4 in 3 in 1.6860 in 1.7300 in 3.0340 in 3.0440 in
B932C015024 No 1 7/8 in 3 in 1.8110 in 1.8550 in 3.0340 in 3.0440 in
B932C016024 Yes 2 in 3 in 1.9360 in 1.9800 in 3.0340 in 3.0440 in
B932C018024 Yes 2 1/4 in 3 in 2.1860 in 2.2300 in 3.0340 in 3.0440 in
B932C019024 Yes 2 3/8 in 3 in 2.3110 in 2.3550 in 3.0340 in 3.0440 in
B932C020024 Yes 2 1/2 in 3 in 2.4360 in 2.4800 in 3.0340 in 3.0440 in
B932C020025 No 2 1/2 in 3 1/8 in 2.4360 in 2.4800 in 3.1590 in 3.1690 in
B932C008026 No 1 in 3 1/4 in 0.9360 in 0.9800 in 3.2840 in 3.2940 in
B932C010026 Yes 1 1/4 in 3 1/4 in 1.1860 in 1.2300 in 3.2840 in 3.2940 in
B932C012026 Yes 1 1/2 in 3 1/4 in 1.4360 in 1.4800 in 3.2840 in 3.2940 in
B932C014026 Yes 1 3/4 in 3 1/4 in 1.6860 in 1.7300 in 3.2840 in 3.2940 in
B932C016026 Yes 2 in 3 1/4 in 1.9360 in 1.9800 in 3.2840 in 3.2940 in
B932C018026 Yes 2 1/4 in 3 1/4 in 2.1860 in 2.2300 in 3.2840 in 3.2940 in
B932C019026 No 2 3/8 in 3 1/4 in 2.3110 in 2.3550 in 3.2840 in 3.2940 in
B932C020026 Yes 2 1/2 in 3 1/4 in 2.4360 in 2.4800 in 3.2840 in 3.2940 in
B932C022026 Yes 2 3/4 in 3 1/4 in 2.6860 in 2.7300 in 3.2840 in 3.2940 in
B932C008028 Yes 1 in 3 1/2 in 0.9360 in 0.9800 in 3.5340 in 3.5440 in
B932C010028 Yes 1 1/4 in 3 1/2 in 1.1860 in 1.2300 in 3.5340 in 3.5440 in
B932C012028 Yes 1 1/2 in 3 1/2 in 1.4360 in 1.4800 in 3.5340 in 3.5440 in
B932C014028 Yes 1 3/4 in 3 1/2 in 1.6860 in 1.7300 in 3.5340 in 3.5440 in
B932C016028 Yes 2 in 3 1/2 in 1.9360 in 1.9800 in 3.5340 in 3.5440 in
B932C018028 Yes 2 1/4 in 3 1/2 in 2.1860 in 2.2300 in 3.5340 in 3.5440 in
B932C019028 No 2 3/8 in 3 1/2 in 2.3110 in 2.3550 in 3.5340 in 3.5440 in
B932C020028 Yes 2 1/2 in 3 1/2 in 2.4360 in 2.4800 in 3.5340 in 3.5440 in
B932C021028 No 2 5/8 in 3 1/2 in 2.5610 in 2.6050 in 3.5340 in 3.5440 in
  Results 101 - 125 of 289  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform