Southeast Non-Ferrous Alloys®
 | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Quotes 0 Items
SENFA® > Continuous Cast Cored Bars > C93800 (SAE 67) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93800 (SAE 67) Bronze Bars

Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 938
SAE 67 78-7-15
ASTM B505


Bunting continuous cast bronze bars of C93800 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid and cored bars are stocked in 13" increments and 105" lengths and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper 75.00 – 79.00%
Tin 6.30 – 7.50%
Lead 13.00 – 16.00%
Physical Properties: Continuous Cast
Tensile Strength PSI: 25,000 min.
Yield Strength PSI: 16,000 min.
Elongation: 5% min.
Brinell Hardness (500 kg load): 55 typical
Machinability Rating: 80
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93800 is similar to C93200 but the higher lead content improves the machinability and frictional properties. C93800 can be used in applications were lubrication may be interrupted without seizing. Bunting also produces other high-leaded alloys including C93400, C93600, C93700, C93900, C94000, C94100, C94300, C94400 and C94500.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 1 - 19 of 19 1 

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max

B938C004008 No 1/2 in 1 in 0.4360 in 0.4800 in 1.0310 in 1.0410 in
B938C006010 No 3/4 in 1 1/4 in 0.6860 in 0.7300 in 1.2810 in 1.2910 in
B938C008012 No 1 in 1 1/2 in 0.9360 in 0.9800 in 1.5310 in 1.5410 in
B938C008016 No 1 in 2 in 0.9360 in 0.9800 in 2.0340 in 2.0440 in
B938C012016 No 1 1/2 in 2 in 1.4360 in 1.4800 in 2.0340 in 2.0440 in
B938C012020 No 1 1/2 in 2 1/2 in 1.4360 in 1.4800 in 2.5340 in 2.5440 in
B938C016020 No 2 in 2 1/2 in 1.9360 in 1.9800 in 2.5340 in 2.5440 in
B938C016024 No 2 in 3 in 1.9360 in 1.9800 in 3.0340 in 3.0440 in
B938C020024 No 2 1/2 in 3 in 2.4360 in 2.4800 in 3.0340 in 3.0440 in
B938C020028 No 2 1/2 in 3 1/2 in 2.4360 in 2.4800 in 3.5340 in 3.5440 in
B938C024028 No 3 in 3 1/2 in 2.9360 in 2.9800 in 3.5340 in 3.5440 in
B938C024032 No 3 in 4 in 2.8910 in 2.9530 in 4.0550 in 4.0710 in
B938C028032 No 3 1/2 in 4 in 3.3910 in 3.4530 in 4.0550 in 4.0710 in
B938C028036 No 3 1/2 in 4 1/2 in 3.3910 in 3.4530 in 4.5550 in 4.5710 in
B938C032036 No 4 in 4 1/2 in 3.8910 in 3.9530 in 4.5550 in 4.5710 in
B938C032040 No 4 in 5 in 3.8910 in 3.9530 in 5.0550 in 5.0710 in
B938C034042 No 4 1/4 in 5 1/4 in 4.0920 in 4.1880 in 5.3280 in 5.3600 in
B938C036044 No 4 1/2 in 5 1/2 in 4.3420 in 4.4380 in 5.5780 in 5.6100 in
B938C040048 No 5 in 6 in 4.8420 in 4.9380 in 6.0780 in 6.1100 in
  Results 1 - 19 of 19 1 
Privacy Policy|Sitemap|Catalog IndexCopyright © 2019 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform