Southeast Non-Ferrous Alloys®
 | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Quotes 0 Items
SENFA® > Continuous Cast Cored Bars > C95500 Aluminum Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C95500 Aluminum Bronze Bars

Check up to five results to perform an action.

C95500 Aluminum Bronze is a non-lead “GREEN” Alloy
Nickel Aluminum Bronze
CDA 955
9D
ASTM B505


Aluminum bronze is a very hard, strong, abrasion resistant bronze whose physical properties remain good at elevated temperatures – compressive strength at 500°F is the same as that of tin bronzes at room temperature. Good applications include heavy earth moving equipment, roll neck bearings, and machine tool bearings.

Solid and cored bars are stocked in 13" increments and 144" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

C95500 is available in either as cast condition or heat-treated.

Typical Properties: (Not to be used for specification purposes.)
Copper:78.00% min.
Aluminum: 10.00 – 11.50%
Iron: 3.00 – 5.00%
Nickel: 3.00 – 5.50%

Physical Properties: Continuous Cast
As Cast
Tensile Strength, PSI: 95,000 min.
Yield Strength, PSI: 42,000 min.
Elongation: 10% min.
Heat Treated
Tensile Strength, PSI: 110,000 min.
Yield Strength, PSI: 62,000 min.
Elongation: 8% min.
Brinell Hardness (3000 kg load; As Cast):195
Brinell Hardness (3000 kg load; Heat Treated): 230
Machinability Rating: 50
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 750°F intermittent to 1200°F

C95500 Aluminum bronze is used for low speed, and very high load bearing applications. The addition of nickel increases the physical properties and corrosion resistance compared to C95400. C95500 requires hardened steel shafts and constant lubrication of grease, graphite or molybdenum-disulfide.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 1 - 19 of 19 1 

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max

B955C008012 No 1 in 1 1/2 in 0.9050 in 0.9450 in 1.5550 in 1.5750 in
B955C008016 No 1 in 2 in 0.9050 in 0.9450 in 2.0550 in 2.0750 in
B955C008024 No 1 in 3 in 0.9050 in 0.9450 in 3.0550 in 3.0750 in
B955C012016 No 1 1/2 in 2 in 1.4050 in 1.4450 in 2.0550 in 2.0750 in
B955C012020 No 1 1/2 in 2 1/2 in 1.4050 in 1.4450 in 2.5550 in 2.5750 in
B955C012024 No 1 1/2 in 3 in 1.4050 in 1.4450 in 3.0550 in 3.0750 in
B955C016020 No 2 in 2 1/2 in 1.9050 in 1.9450 in 2.5550 in 2.5750 in
B955C016024 No 2 in 3 in 1.9050 in 1.9450 in 3.0550 in 3.0750 in
B955C020024 No 2 1/2 in 3 in 2.4050 in 2.4450 in 3.0550 in 3.0750 in
B955C020028 No 2 1/2 in 3 1/2 in 2.3750 in 2.4250 in 3.5750 in 3.6050 in
B955C020032 No 2 1/2 in 4 in 2.3750 in 2.4250 in 4.0750 in 4.1050 in
B955C024028 No 3 in 3 1/2 in 2.8750 in 2.9250 in 3.5750 in 3.6050 in
B955C024032 No 3 in 4 in 2.8750 in 2.9250 in 4.0750 in 4.1050 in
B955C024040 No 3 in 5 in 2.8450 in 2.9050 in 5.1050 in 5.1450 in
B955C028032 No 3 1/2 in 4 in 3.3750 in 3.4250 in 4.0750 in 4.1050 in
B955C028036 No 3 1/2 in 4 1/2 in 3.3750 in 3.4250 in 4.5750 in 4.6050 in
B955C032040 No 4 in 5 in 3.8450 in 3.9050 in 5.1050 in 5.1450 in
B955C032048 No 4 in 6 in 3.8450 in 3.9050 in 6.1050 in 6.1450 in
B955C040048 No 5 in 6 in 4.8450 in 4.9050 in 6.1050 in 6.1450 in
  Results 1 - 19 of 19 1 
Privacy Policy|Sitemap|Catalog IndexCopyright © 2019 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform