High-Leaded Tin Bronze
Bunting continuous cast bronze bars of C93200 give superior quality and performance.
Continuous casting achieves a high density grain structure, free of porosity, resulting in a
reduction of tool wear and component rejects.
Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in
other lengths and non-standard sizes. Consider bars for use when you need special bearings,
bearings for prototypes, or for emergency repairs.
(Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%
Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 10% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F
C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.
WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov