Southeast Non-Ferrous Alloys®
 | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Quotes 0 Items
SENFA® > Continuous Cast Solid Bars > C93700 (SAE 64) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93700 (SAE 64) Bronze Bars

Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 937
SAE 64 83-10-10
ASTM B505


Bunting continuous cast bronze bars of C93700 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: 78.00 – 82.00%
Tin: 9.00 – 11.00%
Lead: 8.00 – 11.00%

Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 6% min.
Brinell Hardness (500 kg load): 60 typical
Machinability Rating 80
Minimum Operating Temperature -450°F
Maximum Operating Temperature 500°F

C93700 has higher tin and lead than C93200 and is used in bearings with higher speeds and loads. It has increased corrosion and oxidation resistance, with good anti-frictional properties, good load-carrying ability and excellent machinability. C93700 can be used in applications where lubrication may be low or interrupted.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 1 - 12 of 12 1 

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

O.D. Min

O.D. Max

B937S000008 Yes SOLID 1 in 1.0310 in 1.0410 in
B937S000012 Yes SOLID 1 1/2 in 1.5310 in 1.5410 in
B937S000016 Yes SOLID 2 in 2.0340 in 2.0440 in
B937S000020 No SOLID 2 1/2 in 2.5340 in 2.5440 in
B937S000024 Yes SOLID 3 in 3.0340 in 3.0440 in
B937S000028 No SOLID 3 1/2 in 3.5340 in 3.5440 in
B937S000032 Yes SOLID 4 in 4.0550 in 4.0710 in
B937S000036 No SOLID 4 1/2 in 4.5550 in 4.5710 in
B937S000040 Yes SOLID 5 in 5.0550 in 5.0710 in
B937S000048 Yes SOLID 6 in 6.0780 in 6.1100 in
B937S000064 Yes SOLID 8 in 8.0780 in 8.1100 in
B937S000080 Yes SOLID 10 in 10.0780 in 10.1340 in
  Results 1 - 12 of 12 1 
Privacy Policy|Sitemap|Catalog IndexCopyright © 2019 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform