Southeast Non-Ferrous Alloys®
 | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Quotes 0 Items
SENFA® > Continuous Cast Solid Bars > C93800 (SAE 67) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93800 (SAE 67) Bronze Bars

Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 938
SAE 67 78-7-15

Bunting continuous cast bronze bars of C93800 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid and cored bars are stocked in 13" increments and 105" lengths and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper 75.00 – 79.00%
Tin 6.30 – 7.50%
Lead 13.00 – 16.00%
Physical Properties: Continuous Cast
Tensile Strength PSI: 25,000 min.
Yield Strength: PSI: 16,000 min.
Elongation: 5% min.
Brinell Hardness (500 kg load): 55 typical
Machinability Rating: 80
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93800 is similar to C93200 but the higher lead content improves the machinability and frictional properties. C93800 can be used in applications were lubrication may be interrupted without seizing. Bunting also produces other high-leaded alloys including C93400, C93600, C93700, C93900, C94000, C94100, C94300, C94400 and C94500.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to

  Results 1 - 12 of 12 1 

Item #


Size I.D.

Size O.D.

O.D. Min

O.D. Max

B938S000008 Yes SOLID 1 in 1.0310 in 1.0410 in
B938S000012 No SOLID 1 1/2 in 1.5310 in 1.5410 in
B938S000016 Yes SOLID 2 in 2.0340 in 2.0440 in
B938S000020 No SOLID 2 1/2 in 2.5340 in 2.5440 in
B938S000024 Yes SOLID 3 in 3.0340 in 3.0440 in
B938S000028 No SOLID 3 1/2 in 3.5340 in 3.5440 in
B938S000032 Yes SOLID 4 in 4.0550 in 4.0710 in
B938S000036 Yes SOLID 4 1/2 in 4.5550 in 4.5710 in
B938S000040 Yes SOLID 5 in 5.0550 in 5.0710 in
B938S000048 Yes SOLID 6 in 6.0780 in 6.1100 in
B938S000064 Yes SOLID 8 in 8.0780 in 8.1100 in
B938S000080 Yes SOLID 10 in 10.0780 in 10.1340 in
  Results 1 - 12 of 12 1 
Privacy Policy|Sitemap|Catalog IndexCopyright © 2019 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform